A raw tunnel sending packets through faketcp
Support linux only because of the rawtcp with cgo disabled
Usage:
udp2faketcp [flags]
Flags:
-s, --server Start as server
-c, --client Start as client
-d, --debug Enable debug
-h, --help Print help
-l, --listen [host:port] Listen address
-r, --remote [host:port] Listen address
-t, --ttl [int] TTL: default 180 (seconds)
-m, --mtu [int] MTU: default 1408 # Server
udp2faketcp -s -l 0.0.0.0:12345 -r 127.0.0.1:51820 -d
# Client
udp2faketcp -c -l 0.0.0.0:51821 -r 127.0.0.1:12345 -diperf3 UDP mode is not used because of a bug mentioned in this issue: esnet/iperf#296
Switched to using iperf, but it seems to have bugs and the speed test is slower in the orbstack container.
The environment used for testing below is consistent.
# Server
iperf -s -u -p <PORT>
# Client
iperf -c <HOST> -u -p <PORT> -t 30 -P 5 -b 1G -d -l 1374 udp2faketcp
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 5] 0.00-29.96 sec 201 MBytes 56.3 Mbits/sec 0.000 ms 132809/286187 (0%)
[ 3] 0.00-30.01 sec 201 MBytes 56.1 Mbits/sec 0.000 ms 132932/286189 (0%)
[ 1] 0.00-30.00 sec 197 MBytes 55.2 Mbits/sec 0.000 ms 135654/286189 (0%)
[ 2] 0.00-29.98 sec 201 MBytes 56.1 Mbits/sec 0.000 ms 133163/286189 (0%)
[ 4] 0.00-29.97 sec 199 MBytes 55.6 Mbits/sec 0.000 ms 134690/286188 (0%)
Compare with udp2raw
[ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams
[ 5] 0.00-30.02 sec 40.7 MBytes 11.4 Mbits/sec 0.000 ms 2819698/2850787 (0%)
[ 2] 0.00-30.01 sec 37.9 MBytes 10.6 Mbits/sec 0.000 ms 2793846/2822760 (0%)
[ 3] 0.00-30.03 sec 38.8 MBytes 10.8 Mbits/sec 0.000 ms 2804290/2833904 (0%)
[ 1] 0.00-30.02 sec 39.8 MBytes 11.1 Mbits/sec 0.000 ms 2824314/2854654 (0%)
[ 4] 0.00-30.03 sec 41.1 MBytes 11.5 Mbits/sec 0.000 ms 2797987/2829360 (0%)
udp2raw: https://github.com/wangyu-/udp2raw
phantun: https://github.com/dndx/phantun
This is a very good project. I have referenced many of its implementation ideas and reproduced them in Golang, the effect is excellent.
