groupr
The groupr package is designed to work with tibbles and dplyr. It provides replacements for tidyverse grouping and pivoting operations, and uses richer data structures to make these operations easier to think about.
Motivation
There are two main ideas behind this package. First is the idea of
inapplicable
data.
While we often use NA as a placeholder for unknown but important
information, R doesn’t provide a way to mark data that should definitely
be ignored. groupr provides an inapplicable value (printed <I>).
The second main idea is that pivoting is just a way to rearrange groups of data. Some kinds of pivots cannot be expressed by a single tidyr pivot statement and require two or even three consecutive pivot calls. Inapplicable groups can be used to describe some of these more complex operations in a very straightforward way.
Usage
Install
devtools::install_github("ngriffiths21/groupr")Easier pivots using groups
library(groupr)
library(dplyr, warn.conflicts = FALSE)
library(tidyr)Make columns out of row groups:
p_df2
#> # A tibble: 5 × 3
#> grp1 grp2 val
#> <chr> <dbl> <dbl>
#> 1 A 1 1.9
#> 2 A 2 10.1
#> 3 B 2 3.1
#> 4 B 1 4.7
#> 5 C NA 4.9
# group and make the NA an inapplicable grouping
p_df2 <- group_by2(p_df2, grp1, grp2 = NA)
group_data(p_df2)
#> # A tibble: 5 × 3
#> grp1 grp2 .rows
#> <polymiss> <polymiss> <list<int>>
#> 1 A 1 [1]
#> 2 A 2 [1]
#> 3 B 1 [1]
#> 4 B 2 [1]
#> 5 C <I> [1]
# groups version of pivot
pivot_grps(p_df2, cols = "grp1")
#> # A tibble: 2 × 2
#> # Row indices: grp2 [2]
#> # Col index: grp1
#> grp2 val$A $B $C
#> <dbl> <dbl> <dbl> <dbl>
#> 1 1 1.9 4.7 4.9
#> 2 2 10.1 3.1 4.9
# tidyr version
pivot_wider(p_df2, names_from = grp1, values_from = val)
#> # A tibble: 3 × 4
#> grp2 A B C
#> <dbl> <dbl> <dbl> <dbl>
#> 1 1 1.9 4.7 NA
#> 2 2 10.1 3.1 NA
#> 3 NA NA NA 4.9Note that with this inapplicable grouping, the value from the “C” group is applied to both subgroups. This behavior is not possible using tidyr.
Make row groups out of columns (pivot longer):
p_df <- group_by2(iris, Species)
# groups version: make column grouping, then pivot
colgrouped <- sep_colgrp(p_df, ".", index_name = "Measurement")
colgrouped
#> # A tibble: 150 × 3
#> # Row indices: Species [3]
#> # Col index: Measurement
#> Species Sepal$Length $Width Petal$Length $Width
#> <fct> <dbl> <dbl> <dbl> <dbl>
#> 1 setosa 5.1 3.5 1.4 0.2
#> 2 setosa 4.9 3 1.4 0.2
#> 3 setosa 4.7 3.2 1.3 0.2
#> 4 setosa 4.6 3.1 1.5 0.2
#> 5 setosa 5 3.6 1.4 0.2
#> 6 setosa 5.4 3.9 1.7 0.4
#> 7 setosa 4.6 3.4 1.4 0.3
#> 8 setosa 5 3.4 1.5 0.2
#> 9 setosa 4.4 2.9 1.4 0.2
#> 10 setosa 4.9 3.1 1.5 0.1
#> # … with 140 more rows
pivot_grps(colgrouped, rows = "Measurement")
#> # A tibble: 300 × 4
#> # Row indices: Species, Measurement [6]
#> Species Measurement Sepal Petal
#> <fct> <chr> <dbl> <dbl>
#> 1 setosa Length 5.1 1.4
#> 2 setosa Length 4.9 1.4
#> 3 setosa Length 4.7 1.3
#> 4 setosa Length 4.6 1.5
#> 5 setosa Length 5 1.4
#> 6 setosa Length 5.4 1.7
#> 7 setosa Length 4.6 1.4
#> 8 setosa Length 5 1.5
#> 9 setosa Length 4.4 1.4
#> 10 setosa Length 4.9 1.5
#> # … with 290 more rows
# tidyr version
pivot_longer(iris, cols = c(Sepal.Length, Sepal.Width, Petal.Length, Petal.Width),
values_to = "value")
#> # A tibble: 600 × 3
#> Species name value
#> <fct> <chr> <dbl>
#> 1 setosa Sepal.Length 5.1
#> 2 setosa Sepal.Width 3.5
#> 3 setosa Petal.Length 1.4
#> 4 setosa Petal.Width 0.2
#> 5 setosa Sepal.Length 4.9
#> 6 setosa Sepal.Width 3
#> 7 setosa Petal.Length 1.4
#> 8 setosa Petal.Width 0.2
#> 9 setosa Sepal.Length 4.7
#> 10 setosa Sepal.Width 3.2
#> # … with 590 more rowsUsing this approach we can preserve separate columns for each flower part rather than combining them into one.
Pivot both rows and columns:
p_df3 <- pivot_grps(p_df2, cols = "grp1")
p_df3
#> # A tibble: 2 × 2
#> # Row indices: grp2 [2]
#> # Col index: grp1
#> grp2 val$A $B $C
#> <dbl> <dbl> <dbl> <dbl>
#> 1 1 1.9 4.7 4.9
#> 2 2 10.1 3.1 4.9
# groups version
pivot_grps(p_df3, rows = "grp1",
cols = "grp2")
#> # A tibble: 3 × 2
#> # Row indices: grp1 [3]
#> # Col index: grp2
#> grp1 val$`1` $`2`
#> <chr> <dbl> <dbl>
#> 1 A 1.9 10.1
#> 2 B 4.7 3.1
#> 3 C 4.9 4.9Lifecycle
At this point this is experimental, with limited testing. The API is likely to change.
