GoogleTestAdapter

Adds capability to run C++ tests written with the Google Test framework to Visual Studio. Installing this test adapter via NuGet (as compared to installation through the VS Marketplace) lacks debugging and configuration through VS Options as well as the toolbar (configuration via test settings file is supported). Main use case: build servers.


Keywords
native, gtest, Google, Test, adapter, C++, unit, integration, automated, testing, c-plus-plus, cpp, google-test, visual-studio-extension
License
Apache-2.0
Install
Install-Package GoogleTestAdapter -Version 0.18.0

Documentation

Build status Code coverage Visual Studio Marketplace downloads NuGet downloads

Google Test Adapter

Google Test Adapter (GTA) is a Visual Studio extension providing test discovery and execution of C++ tests written with the Google Test framework.

Donate to Google Test Adapter

Screenshot of Test Explorer

Features

History

Donations

In the last couple of months, I noticed that my private laptop certainly has a finite lifetime. Thinking about the requirements a new one has to stand up to, I realized that developing and supporting Google Test Adapter has in the last years been one of the major use cases of that laptop. Thus, I decided to take this as reason for from now on accepting donations :-)

Update: In the meantime, I have received a few donations, and some rather generous ones (thanks again to everybody - the new laptop is great :-) ), but since I'm still quite far away from my original donation goal of collecting half of the laptop's price, I will leave this section as is.

Therefore, if you would like to appreciate development and support of Google Test Adapter, please consider to donate!

Donate to Google Test Adapter

Please note that I will see your donations as appreciation of my work so far and a motivational factor for the future, but just to be sure, they do not result in any obligations on my part (e.g. prioritized support, your favorite feature, or even continued maintenance).

Usage

Installation

Download from Visual Studio Marketplace Download from NuGet Download from GitHub

Google Test Adapter can be installed in three ways:

  • Install through the Visual Studio Marketplace at Tools/Extensions and Updates - search for Google Test Adapter.
  • Download and launch the VSIX installer from either the Visual Studio Marketplace or GitHub
  • Add a NuGet dependency to the Google test adapter nuget package to your Google Test projects. Note, however, that Visual Studio integration is limited this way: VS can discover and run tests, but no debugging, options or toolbar will be available; configuration is only possible through solution config files (see below).

After restarting VS, your tests will be displayed in the Test Explorer at build completion time. If no or not all tests show up, have a look at the trouble shooting section.

Note that due to Microsoft requiring VS extensions to support asynchronous package loading, the last version of Google Test Adapter which supports Visual Studio 2012 is 0.14.4.

Configuration

GTA provides different ways of configuration:

  • The Google Test Adapter section of Visual Studio's Tools/Options (not available if installed via NuGet). These options are referred to as global options in the following.
  • The GTA toolbar (not available if installed via NuGet). The most important runtime options (i.e., Parallel test execution, Break on failure, Catch exceptions, and Print test output) can also be set via a toolbar; this is equivalent to setting the according options via Tools/Options/Google Test Adapter.
  • Solution settings files (not available if run via VsTest.Console.exe). They are provided by means of an XML configuration file; this allows sharing of settings via source control. The configuration file must be placed in the same folder as the solution's .sln file, and must have the same name as that file, but with extension .gta.runsettings. E.g., if the solution file's name is Foo.sln, the settings file must be named Foo.gta.runsettings.
  • Visual Studio user settings files. VS allows for the selection of test settings files via the Test/Test Settings menu, and to pass such settings files to VsTest.Console.exe via the /Settings parameter.
  • Environment variable GTA_FALLBACK_SETTINGS. The settings file referred to from that environment variable will be used only if GTA fails to receive settings from the VS test framework; currently, this is only known to happen when running GTA through VsTest.Console.exe on VS 2017 V15.5 and later (see #184).

The format of solution and user settings files is the same: a <GoogleTestAdapterSettings> node contains the solution settings and the (possibly empty) set of project settings and is itself contained in a <RunSettings> node (which in the case of user settings files might contain additional, e.g. VS specific settings). In contrast to solution settings, each set of project settings additionally has a regular expression to be evaluated at test discovery and execution time.

The final settings to be used are computed by merging the available settings, vaguely following Visual Studio's approach of configuration inheritance. Merging is done in two stages:

  1. The available global, solution file, and user file settings are merged into solution settings and a set of project settings. This is done in increasing priority, i.e., solution file settings override global settings, and user file settings override solution settings. Project settings of solution and user settings files are merged if they share the exact same regular expression.
  2. At test discovery and execution time, each test executable's full path is matched against the project settings' regular expressions; the first matching project settings are used for the particular test executable. If no project settings are found, the solution settings are used.

Overall, given a test executable mytests.exe, the following settings apply to that executable in decreasing priority:

  1. Project settings of a user settings file, the regular expression of which matches the full path of mytests.exe.
  2. Project settings of a solution settings file, the regular expression of which matches the full path of mytests.exe.
  3. Solution settings of a user settings file.
  4. Solution settings of a solution settings file.
  5. Global settings.

Note that due to the overriding hierarchy described above, you probably want to provide only a subset of the nodes in your configuration files. For instance, providing the node <DebugMode>true</DebugMode> in a shared solution settings file will make sure that all sharing developers will run GTA with debug output, no matter what the developer's individual settings at Tools/Options/Google Test Adapter are (and unless the developer has selected a test settings file via VS, which would override the solution setting).

For reference, see a settings file AllTestSettings.gta.runsettings containing all available settings, a more realistic solution settings file SampleTests.gta.runsettings as delivered with the SampleTests solution, and a user settings file NonDeterministic.runsettings as used by GTA's end-to-end tests. The syntax of the GTA settings files (excluding the <RunSettings> node) is specified by this schema.

Settings helper files

GTA does not provide direct access to VS project settings such as Project > Properties > Debugging > Environment. Additionally, when run as NuGet dependency, GTA does not have access to information such as solution dir or Platform/Configuration a test executable has been built with.

To overcome these problems, GTA supports so-called settings helper files which provide that information to GTA. Helper files are usually generated as part of the build, e.g. within a post-build event, which might look like this:

echo SolutionPath=$(SolutionPath)::GTA::SolutionDir=$(SolutionDir)::GTA::PlatformName=$(PlatformName)::GTA::ConfigurationName=$(ConfigurationName)::GTA::TheTarget=$(TargetFileName) > $(TargetPath).gta_settings_helper

This command generates a file $(TargetPath).gta_settings_helper (where $(TargetPath) is the path of the final test executable) containing key/value pairs separated by ::GTA::. At file generation time, the VS macros will be replaced by the actual values, which can then in turn be used as placeholders within the GTA settings. In particular, the helper file generated by the above command will

  • make sure that the $(SolutionDir), $(PlatformName), and $(ConfigurationName) placeholders will be available even if the runtime environment does not provide them (CI) and
  • will provide the value of the VS $(TargetFileName) macro to GTA, where it can be referred to as the $(TheTarget) placeholder

Note that the settings helper files need to be located within the same folder as their corresponding test executable, and must have the test executable's name concatenated with the .gta_settings_helper ending (make sure to ignore these files in version control if necessary).

Assigning traits to tests

GTA has full support for traits, which can be assigned to tests in two ways:

  • You can make use of the custom test macros provided in GTA_Traits_1.8.0.h (or GTA_Traits_1.7.0.h if you are still on Google Test 1.7.0), which contain macros for all test types of the Google Test framework. The macros do not change behavior of the tests; they only add some information to the generated test code which encodes the traits assigned to the respective test. All GTA provided macros follow the same naming schema <Google Test macro>_TRAITS, where, obviously, <Google Test macro> is the name of the according macro in Google Test. Each test can be assigned up to 8 traits.
  • Combinations of regular expressions and traits can be specified under the GTA options: If a test's name matches one of these regular expressions, the according trait is assigned to that test.

More precisely, traits are assigned to tests in three phases:

  1. Traits are assigned to tests which match one of the regular expressions specified in the traits before option. For instance, the expression .*///Size,Medium assigns the trait (Size,Medium) to all tests.
  2. Traits added to tests via test macros are assigned to the according tests, overriding traits from the first phase. For instance, the test declaration TEST_P_TRAITS(ParameterizedTests, SimpleTraits, Size, Small) will make sure that all test instances of test ParameterizedTest.SimpleTraits will be assigned the trait (Size,Small) (and override the Size trait assigned from the first phase).
  3. Traits are assigned to tests which match one of the regular expressions specified in the traits after option, overriding traits from phases 1 and 2 as described above. For instance, the expression .*\[1.*\]///Size,Large will make sure that all parameterized tests where the parameter starts with a 1 will be assigned the trait (Size,Large) (and override the traits assigned by phases 1 and 2).

Note that traits are assigned in an additive manner within each phase, and in an overriding manner between phases. For instance, if a test is assigned the traits (Author,Foo) and (Author,Bar) in phase 1, the test will have both traits. If the test is also assigned the trait (Author,Baz) in phases 2 or 3, it will only have that trait. See test code for examples.

Evaluating the test executable's exit code

If option Exit code test case is non-empty, an additional test case will be generated per text executable (referred to as exit code test in the following), and that exit code test will pass if the test executable's exit code is 0. This allows to reflect some additional result as a test case; for instance, the test executable might be built such that it performs memory leak detection at shutdown (see below for example); the result of that check can then be seen within VS as the result of the according additional test.

A couple of tokens can used as part of a test executable's output; if GTA sees theses tokens, it will act accordingly:

  • GTA_EXIT_CODE_OUTPUT_BEGIN: This token will make GTA capture the following output and add it to the exit code test as error message.
  • GTA_EXIT_CODE_OUTPUT_END: This token will stop GTA from adding the following output to the error message. If it is not provided, GTA will capture the complete remaining output as error message of the exit code test.
  • GTA_EXIT_CODE_SKIP: This token will make the exit code test have outcome Skipped. This can e.g. be useful if a particular check is only perfomed in Debug mode, or to provide a general warning that something has gone wrong without making the exit code test fail.

Note that a test executable might be run more than once by GTA (e.g., if tests are run in parallel, or if the selection of tests to be run results in command lines too long for a single test run). In this case, the exit codes and respective outputs of a test exectutable are aggregated as follows:

  • The exit code test will be reported as
    • skipped if all runs of that executable have been reported as skipped,
    • failed if at least one test run has been reported as failed, and
    • passed otherwise.
  • The exit code reported will be the one with the greatest absolute value; e.g., if the exit codes have been -2, 0, and 1, the reported exit code will be -2.
  • Captured outputs will all go into the single exit code test's error message.
Example usage: Memory leak detection

An example usage of the Exit code test case can be found as part of the SampleTests solution: Project MemoryLeakTests makes use of MS' memory leak detection facilities and reports the results to VS via an exit code test. The approach can easily be re-used for other Google Test projects:

  • add files gta_leak_detection.h and gta_leak_detection.cpp to the project
  • in the project's main method, return the result of gta_leak_detection::PerformLeakDetection(argc, argv, RUN_ALL_TESTS()) (instead of the result of RUN_ALL_TESTS(), see example)
  • set the following GTA options (probably through the settings file):
    • <ExitCodeTestCase>MemoryLeakTest</ExitCodeTestCase> (enables evaluation of the executable's exit code; feel free to choose another name)
    • <AdditionalTestExecutionParam>-is_run_by_gta</AdditionalTestExecutionParam> (makes sure the test executable is aware of being run by GTA)

However, note that Google Test as of V1.8.1 uses some memory allocation which is recognized by MS' leak detection mechanism as a leak (although it isn't), in particular for failing assertions. Some of these "false positives" have been fixed with the linked issue, making leak detection useful as long as all tests are green; however, and until this problem is fixed, the memory leak detection provided by GTA will result in a skipped exit code test in case RUN_ALL_TESTS() does not return 0, but will report the leak in the test's error message. If you run into such problems, please report them against the Google Test repository if appropriate.

Known issues
  • Visual Studio 2013: if a test project FooTests makes use of a main() method of a BarTests project (e.g. by referencing its main.cpp), the exit code test of FooTests will be grouped under BarTests' executable.

Running tests from command line with VSTest.Console.exe

GTA can be used to run tests from the command line, which can be done making use of VS's VSTest.Console.exe. GTA supports all the tool's command line options, including /UseVsixExtensions and /TestAdapterPath.

Note, however, that VSTest.Console.exe will not make use of GTA solution settings (if the solution containing the tests happens to use such settings). All settings to be used by VSTest.Console.exe need to be passed using the /Settings command line option. Note also that the $(SolutionDir) placeholder is neither available in the Test setup/teardown batch file options nor in the Additional test execution parameters option.

The tests to be run can be selected via the /TestCaseFilter option. Filters need to follow the syntax as described in this blog entry. GTA supports the following test properties:

  • DisplayName
  • FullyQualifiedName
  • Type
  • Author
  • TestCategory
  • Source (i.e., binary containing the test)
  • CodeFilePath (i.e., source file containing the test)
  • Class
  • LineNumber
  • Id
  • ExecutorUri

Additionally, traits can be used in test case filters. E.g., all tests having a Duration of short can be executed by means of the filter /TestCaseFilter:"Duration=short".

Parallelization

Tests are run sequentially by default. If parallel test execution is enabled, the tests will be distributed to the available cores of your machine. To support parallel test execution, additional command line parameters can be passed to the Google Test executables (note that this feature is not restricted to parallel test execution); they can then be parsed by the test code at run time and e.g. be used to improve test isolation.

GTA remembers the durations of the executed tests to improve test scheduling for later test runs. The durations are stored in files with endings .gta.testdurations - make sure your version control system ignores these files.

Note that since VS 2015 update 1, VS allows for the parallel execution of tests (again); since update 2, Test Explorer has an own Run tests in parallel button, and VsTest.Console.exe suppports a new command line option /Parallel. Neither button nor command line option has any effect on test execution with GTA.

Test setup and teardown

If you need to perform some setup or teardown tasks in addition to the setup/teardown methods of your test code, you can do so by configuring test setup/teardown batch files, to which you can pass several values such as solution directory or test directory for exclusive usage of the tests.

Feature availability

GTA runs in three different environments:

  • Within Visual Studio and installed via VSIX (i.e., through Extensions and updates or by downloading and executing the VSIX file)
  • Within Visual Studio and installed via NuGet (i.e., pulled via a project's NuGet dependencies)
  • Within VsTestConsole.exe (making use of the /UseVsixExtensions:true or the /TestAdapterPath:<dir> options)

For technical reasons, not all features are available in all environments by default; refer to the table below for details.

Feature VS/VSIX VS/NuGet VsTest.Console
Test discovery yes yes yes
Test execution yes yes yes
Test debugging yes no -
Configuration via
- VS Options yes no -
- VS Toolbar yes no -
- Solution test config file yes no no
- User test config file yes1 yes1 yes2
Placeholders
- $(SolutionDir) yes yes3, 4 yes3
- $(PlatformName) yes yes3 yes3
- $(ConfigurationName) yes yes3 yes3
- $(ExecutableDir) yes yes yes
- $(Executable) yes yes yes
- $(TestDir)5 yes yes yes
- $(ThreadId)5 yes yes yes
- Additional placeholders yes3 yes3 yes3
- Environment variables yes yes yes

1: Via Test/Test Settings/Select Test Settings File
2: Via /Settings option
3: If settings helper files are provided
4: During test execution, placeholders are available even without settings helper files
5: Only during test execution; placeholders are removed in discovery mode

External resources

Trouble shooting

General advice
  • Make sure that your test executable can be run on the console from within the folder it is located at. Try both with and without gtest option --gtest_list_tests.
  • Enable options Print debug info and Print test output at Tools/Options/Google Test Adapter/General to understand what's going wrong.
  • In case of performance problems, additionally enable option Timestamp output.
None or not all of my tests show up
  • The Debug mode will show on the test console whether your test executables are recognized by GTA. If they are not, you have two options:
    • If your test executable is ..\FooTests.exe, make sure that a file ..\FooTests.exe.is_google_test exists.
    • Configure a Test discovery regex. In case of GTA installation via NuGet, do not forget to add the regex to the solution config file (which might be a good idea anyways).
  • Your test executable can not run with command line option --gtest_list_tests. Make sure that your tests can be listed via command line; if they do not, debug your test executable, e.g. by making the according test project the startup project of your solution, and placing a breakpoint at the main method of your test executable. Here are some reasons why your tests might not be listed:
    • The test executable crashes.
    • Encoding issues prevent Google Test from properly reading the command line arguments (see e.g. issue #149).
  • If your project configuration contains references to DLLs which do not end up in the build directory (e.g. through Project/Properties/Linker/Input/Additional Dependencies), these DLLs will not be found when running your tests. Use option PATH extension to add the directories containing these DLLs to the test executables' PATH variable.
  • By default, test discovery for an executable is canceled after 30s. If in need, change this with option Test discovery timeout in s. Also consider moving expensive initialization code to the appropriate gtest setup facilities (e.g. global, per test suite, or per test.).
  • For security reasons, Visual Studio's test discovery process runs with rather limited permissions. This might cause problems if your code needs those permissions already during test discovery (e.g. if your code tries to open a file in write mode). Make sure that such code is executed at the appropriate gtest setup facilities (see above).
  • If your project happens to be a makefile project, there's a pitfall which will prevent GTA from discovering your tests: It appears that when importing a makefile project into VS, the Output setting of the project is populated from the makefile's content. However, if the makefile is edited later on such that the location of the generated test executable changes, VS does not find the test executable any more. One symptom of this is that your project can not be launched any more with F5. Make sure that the Output setting of the project is consistent with its makefile to avoid this problem.

In general, you can identify issues with your test executables by debugging them within VS: make the according test project the startup project of your solution, add command line arguments as desired, place breakpoints at points of interest and launch your test executable with F5.

No source locations and traits are found for my tests
  • The test adapter is not able to find the pdb of your test executable, e.g. because it has been deleted or moved (and indicates that with a warning in the test output window). Rebuilding your solution should regenerate the pdb at an appropriate location.
  • The test executable's project settings result in a pdb file not containing the information necessary to resolve source locations and traits (see #46). Change the setting as indicated below and rebuild your solution.
    • VS 2015 and earlier: Yes or Optimize for debugging (/DEBUG)
    • VS 2017: Generate debug information optimized for sharing and publishing (/DEBUG:FULL)
  • Option Parse symbol information is set to false, making GTA not parse that information out of the pdb file intentionally. The actual set of options used is potentially composed from VS options, a solution settings file, and a user settings file; the resulting set of options will be logged to the test output window if the Print debug info option is set to true.
Test discovery is slow/does not seem to finish
  • Switch off Parse symbol information. You won't have source locations and traits from macros, but will still get clickable stack traces in case a test fails. This will avoid scanning the executables' .pdb files.
  • Configure a regex matching your test executable, or create an .is_google_test file (see above). This will avoid scanning the binary for gtest indications.
  • Make sure Print debug info and Print test output are false.

You might consider using GTA's project settings to switch off symbol parsing and binary scanning for problematic test executables only, thus compromising between speed of test discovery and build maintainability.

The Test Explorer window can not be opened after installing GTA
  • Your MEF cache might have been corrupted. Please refer to issue #172 for help.
The Google Test Adapter extension is disabled when I start Visual Studio
  • Your MEF cache might have been corrupted. Please refer to issue #98 for help.

Development of Google Test Adapter

Please refer to our wiki.

Credits

People

Google Test Adapter is written and maintained by Christian Soltenborn.

The first version of GTA was a slightly enhanced C# port of the F# Google Test Runner, written by Markus Lindqvist. We have also learned a lot from the JavaScript test runner Chutzpah, written by Matthew Manela.

GTA has benefited from all kinds of contributions, be it feature requests, bug reports, code snippets, testing of new features and bugfixes, or even pull requests:

  • Jonas Gefele has been a regular and significant contributor up to version 0.10.1 (with more to come in the future, as I hope :-))
  • Most (hopefully all) other contributors are mentioned in the according release notes.

Organizations

  • My employer Connext Communication GmbH for supporting testing of GTA by providing virtual machines with different Visual Studio installations.

Tools

  • ReSharper - awesome VS extension for .NET development, including refactoring, static analysis etc.
    • thanks to JetBrains for providing free licenses for our developers!
    • note that JetBrains' Resharper C++ can also run tests written using Google Test
  • AppVeyor - awesome .NET CI build services
    • thanks for providing free services and fantastic support for open source projects!
  • Codecov - code coverage visualization facilities
    • thanks for providing free services for open source projects!
  • OzCode - VS extension for enhanced debugging experience
    • thanks to CodeValue for providing free licenses for our developers!
  • CommonMark.NET - open source Markdown to HTML converter
  • OpenCover - open source .NET code coverage