Cypress Capsense i2c libraries

Libraries for controlling the Cypress Capsense(R) C8YC201xx series touch sensor chips via i2c.

##Installation

###Arduino

After downloading, rename "Arduino" folder to CypressCapsense and copy to Arduino Libraries folder. Restart Arduino IDE, then open File->Sketchbook->Library->CypressCapsense->status sketch.

###Beaglebone Black Python

Make sure the time on your BBB is correct.

$ sudo ntpdate pool.ntp.org

To install the prerequisites (Debian):

$ sudo apt-get install build-essential python-dev python-setuptools python-pip python-smbus -y

Download the repository, enter the Beaglebone directory, and run:

$ python setup.py install

Alternatively, this library is also available in PyPi:

$ pip install CypressCapsense_I2C

##External Documentation Backups to the below documents are listed in ReferenceMaterials/

###Cypress Capsense CY8C201xx http://www.cypress.com/?id=1377

###CY8C201xx Register Reference Guide http://www.cypress.com/?rID=14664 http://www.cypress.com/?docID=41921

###CY8C201xx Datasheet http://www.cypress.com/?rID=3912 http://www.cypress.com/?docID=50758

##See Also

###Nan-Wei Gong's Guitar Touch Controller http://nanweigong.com/blog/?p=102 http://nanweigong.com/blog/wp-content/uploads/2012/06/cy8c20.txt

###Joseph Malloch's Sporano T-Stick http://josephmalloch.wordpress.com/mumt619/ https://github.com/j4n/sopranino_t-stick/blob/master/firmware/test_capsense/firmware/firmware.pde