profileNJ

Utility package for gene tree correction and reconciliation with a species tree, written in python and based on the ete2 toolkit.

Installation

python setup.py install

You may need sudo privileges. You can also install a local version by using the '--user' flag.

Minimum Documentation

profileNJ

profileNJ correct genetree by contracting weak branches and resolving them to have binary trees with a minimum reconciliation cost to their specietree. profileNJ use NJ in order to keep sequence information as much as possible an can output multiple solutions. If the input tree is considered unrooted, profileNJ can test every possible root and return the binary tree with the lowest duplication-lost or all rooted binary tree.

• -h, --help
  Show the help message and exit.
• -s SPECIETREE, --sFile SPECIETREE
  Name of the file containing the species newick tree (default: None).
• -S SMAP, --sMap SMAP
  Gene to species map. Use the standard format. (default: None)
• -g GENETREE, --gFile GENETREE
  Name of the file containing the gene newick tree (default: None).
• -d DISTFILE, --dist DISTFILE
  Name of the file containing the distances between each pair of genes (The gene set should be the same for the leaf set of the genetree). (default: None)
• -o OUTFILE, --output OUTFILE
  Output file with the corrected tree. The genetree is printed on stdout if omitted. (default: None)
• -gl GLINE, --gLine GLINE
  Index of the line in the gene tree file that corresponds to the current gene tree. Indexing start with "1" (default: 1)
• -r {none,all,best}, --reroot {none,all,best}
  Enable/Disable root mode. (default: none)
  - none : disable reroot mode, correct the input genetree and return the result.
  - all : enable reroot mode, reroot the genetree at each node and return all solution for each rooted tree.
  - best : enable reroot mode, reroot the genetree at each node and return any solution that minimize the reconciliation score.
• -nf, --nnflag
  Treat negative distances as large distances (default:False).
• --sep GENE_SEP Gene-Specie separator for each leaf name in the genetree. PolytomySolver will guess by default in a very limited list of special character. (default: None) *';;' is not a valid separator for the newick format! IF YOUR SEPARATOR IS ";;", DON'T USE THIS FLAG. THE PROGRAM WILL AUTOMATICALLY GUESS. *
• --mValue MVAL
  Set largest value in the distance matrix. Entries on the main diagonal and negative values will be replaced by mValue. (default: 1e+305)
• -c {nj,upgma}, --cluster {nj,upgma} Set the clustering methods. (default: nj)
  - upgma : UPGMA (Unweighted Pair Group Method with Arithmetic Mean) clustering algo.
  - nj : neighbor joining clustering method, (slower).
• --slimit SOL_LIMIT
  Set the max number of solution per genetree. Possible values are -1 to return all the solution or n, n>0 for a specific number of solution. Setting this argument to -1 is computationally expensive. (default: 30)
• --plimit PATH_LIMIT
  Set the max number of solution for each polytomy in the genetree. Possible values are -1 to explore all the solution or n, n>0 for a specific number of solution. Setting this argument to -1 is also computationally expensive. (default: -1)
• -v
  Output verbosity (default: False)
• --cap
  Capitalize the species name of the genetree leaves to match each species. Almost all functions are case sensitive. (default: False)
• --batch
  Use this flag to enable batch mode. In batch mode, gLine value is discarded, --dist should be a file whose line link to the distance matrix file of the genetree at the same line number in your genetree file
• --parallelize
  Use parallelization (default False)
• --firstbest
  Only output solution for the first root with the best dl score encountered
• --cost D L
  Change the cost of duplications (D) and losses(L). D L : 2 float values, duplication and loss cost in this order (default: D=1 and L=1 )
• --seuil
  Branch contraction threshold, when the tree is binary. Use only when the tree is binary.

File formats

see polytomy-solver-distance

reconcile

reconcile compute and output the reconcilied gene tree, and it's cost, between a binary genetree and a binary species tree. Two mode are possible : in the run mode, you can compute the reconcilied gene tree, whereas in the smap mode, reconcile return an automatic map between the genes in the gene trees and the species.

optional arguments:

• -h, --help show this help message and exit
• -s SPECIETREE, --sFile SPECIETREE Specie tree in newick format
• -S SMAP, --sMap SMAP Gene to species map. Use the standard format.
• -g GENETREE, --gFile GENETREE Gene tree in newick format.
• --sep GENE_SEP Gene-Specie separator for each leaf name in the genetree. The program will guess by default. But you should provide it
• --spos SPOS The position of the specie name according to the separator.
• --cap Capitalize the species name of the genetree leaves to match each species. Almost all functions are case sensitive.
• --display_losses Display losses in the reconciliation
• --output OUTPUT, --out OUTPUT Output an image of the reconciliated tree.
• --outform OUTFORM Accepted format are svg|pdf|png
• --export_orthoxml Export reconciliated tree to export_orthoxml. Losses are not exported
• --show_branch_tag Show branch length and support
• --verbose, -v Verbosity
• --reroot, -r Reroot in order to display all root reconciliation result. Not Available in batch mode !!
• --debug Debugging ( test, will be removed )
• --batch Batch mode, use profileNJ file output

polytomySolver

polytomySolver is a new algorithm for resolving gene trees with polytomies in linear time. polytomySolver support both unit and weighted duplication and loss cost. It's an improved version of the quadratic algorithm described by Lafond and al. in 2012 (M. Lafond, K.M. Swenson, and N. El-Mabrouk. An optimal reconciliation algorithm for gene trees with polytomies. In LNCS, volume 7534 of WABI, pages 106-122, 2012.), using the compressed species tree idea of Zheng and Zhang (Y. Zheng and L. Zhang. Reconciliation with non-binary gene trees revisited. In Lecture Notes in Computer Science, volume 8394, pages 418-432, 2014. Proceedings of RECOMB.). polytomySolver is faster than Notung and thus can be used on large trees.

• -h, --help show this help message and exit
• -s SPECNW, --spectree SPECNW Name of the file containing the species newick tree.
• -S SMAP, --sMap SMAP Gene to species map. Use the standard format.
• -g GENENW, --genetree GENENW Name of the file containing the gene newick tree.
• --sep GENE_SEP Specify a gene separator if you're are not using a smap
• --losscost LOSSCOST Specify the losses cost
• --dupcost DUPCOST Specify the duplication cost
• --nsol NSOL Number of solution to output, Our implementation of Notung algorithms and both linear and dynamic versions of the Zheng and Zhang's algorithm only output one solution
• --spos SPOS Gene position when you have specified a separator. Possible values are "prefix" and "postfix". Default value is prefix.
• -o OUTFILE, --output OUTFILE Name of your output files with the corrected tree. The resolutions are printed on stdout if omitted.
• --mode {psolver,linzz,dynzz,notung,dynzz2} Algorithm to use. psolver is the default algorithm and correspond to polytomySolver. "linzz" and "dynzz" are respectively the linear and dynamic version of the Zheng and Zhang's algorithm.
• --showcost Use this to show the reconciliated cost at the end. By default, only the resolved tree is shown

Reusable modules

TreeClass

Bases from the TreeNode class of the ete package, TreeClass is a tree representation class. A tree consists of a collection of TreeClass instances connected in a hierarchical way. A TreeClass object can be loaded from the New Hampshire Newick format (newick). TreeClass add specific functions for tree processing not present in ete's TreeNode.

run pydoc for minimum documentation.

TreeUtils

TreeUtils offer several static functions related to phylogeny tree. With You can fetch ensembl genetree and reconcile a gene tree to its species tree.

• fetch_ensembl_genetree_by_id : fetch an ensembl tree using the tree id.
• fetch_ensembl_genetree_by_member : fetch an ensembl tree using a member id.
• lcaMapping : Map a genetree to a specietree.
• reconcile : Reconcile the genetree with the specietree

ClusterUtils

ClusterUtils is an implementation of UPGMA (Unweighted Pair Group Method with Arithmetic Mean) and NJ (Neighbor-Joining), two clustering distance-based method for tree construction.

NCBI_tree_of_life

see SPECIES_TREE

Script to reconstruct the tree of life using the ncbi taxonomy. The current newick file (tree.nw) is obtained with the latest ncbi taxonomy release.