PyMeteostation is software made for controlling meteostation built of MLAB electronic modules (http://www.mlab.cz/).

Currently supported sensors are:

• SHT25v01A (Sensirion SHT25)
• ALTIMET01A (MPL3115A2)

• Pymlab (>= 0.2, https://pypi.python.org/pypi/pymlab/)

1. Install PyMeteostation:

   python setup.py install
   

2. Install the AWS02A weewx driver:

   Copy the aws02a.py driver into your weewx instalation

   cp weewx_driver/aws02a.py /home/weewx/bin/weewx/driver/
   

3. Set AWS02A in weewx configuration file:

   • [Station] section:

     station_type = AWS02A

   • [AWS02A] section:

     driver = weewx.drivers.aws02a

   • [[I2C_Bus]] section:

     Enter I2C configuration. (example options: type, address, channel...)

     Section names must be unique.

   • [[Sensor_mapping]] section:

     Into option, which you want to send, fill sensor name, from which will be gathered data, and sensor measurement ID.

     See example for more information.

4. Start weewx

   Example:

   [Station]
   
       # Description of the station location
       location = Testovaci stanice Svakov
   
       # Latitude and longitude in decimal degrees
       latitude = 90.000
       longitude = 0.000
   
       # Altitude of the station, with unit it is in. This is downloaded from
       # from the station if the hardware supports it.
       altitude = 412, meter    # Choose 'foot' or 'meter' for unit
   
       # Set to type of station hardware. There must be a corresponding stanza
       # in this file with a 'driver' parameter indicating the driver to be used.
       station_type = AWS01A
   
       # If you have a website, you may specify an URL
       #station_url = http://www.example.com
   
       # The start of the rain year (1=January; 10=October, etc.). This is
       # downloaded from the station if the hardware supports it.
       rain_year_start = 1
   
       week_start = 6
   
   ##############################################################################
   
   [AWS01A]
       driver = weewx.drivers.aws02a
   
       [[I2C_Bus]]
           port = 1
           [[[barometer]]]
               type = altimet01
               address = 0x60
           [[[hum_temp]]]
               type = sht25
               address = 0x40
   
       [[Sensor_mapping]]
           outTemp = barometer, 0
           pressure = barometer, 1
           outHumidity = hum_temp, 0