DOCKER-MACHINE ADD SSH
This is a command line program to allow you to use ordinary
ssh commands with Docker
Machine rather than use
docker-machine ssh
or docker-machine scp.
USAGE
usage: docker-machine-add-ssh [-h] [-r] [-d] [-f] [-B] [-S] name
Adds docker-machine ssh configuration to your personal ssh configuration.
Normally, you ssh to a docker-machine using command "docker-machine ssh
<mach>" but after running this utility once for the specified machine, you can
then on use ssh in the normal way, e.g. "ssh <mach>". Other standard programs
such as scp, sftp, rsync, and anything else that relies on them or normal ssh
can then also be used to that docker-machine.
positional arguments:
name docker machine name
optional arguments:
-h, --help show this help message and exit
-r, --replace do not fail if host entry already exists, just replace it
-d, --delete just delete any existing host entry
-f, --files get parameters directly from files rather than via docker-
machine command
-B, --nobackup do not create a backup file
-S, --nostrict disable strict host key check
Note you can set default starting arguments in ~/.config/docker-machine-add-
ssh-flags.conf.
See the latest documentation and code at https://github.com/bulletmark/docker-machine-add-ssh/.
EXAMPLES
$ tree foodir
foodir
├── a
└── b
# Create a docker machine:
$ docker-machine create vb1
...
# Login to that machine:
$ docker-machine ssh vb1
...
exit
# Copy a directory and it's files to the new machine the docker-machine way:
$ docker-machine scp -r foodir vb1:
b 100$ 0 0.0KB/s 00:00
a 100% 0 0.0KB/s 00:00
# Or, use docker-machine rsync mode:
$ docker-machine scp -r -d foodir vb1:
sending incremental file list
foodir/a
0 100% 0.00kB/s 0:00:00 (xfr#1, to-chk=1/3)
foodir/b
0 100% 0.00kB/s 0:00:00 (xfr#2, to-chk=0/3)
# Instead, do all this normally, after executing docker-machine-add-ssh:
$ docker-machine-add-ssh vb1
vb1 entry added to /home/mark/.ssh/config.
# Login to that machine normally. Be sure to do this first time to clear
# the host check as seen in this example:
$ ssh vb1
The authenticity of host '192.168.99.100 (192.168.99.100)' can't be established.
ECDSA key fingerprint is SHA256:Gya8jUcRhXlO/IkkTicrbLEPmMV0V5uOALB2Y5kJUCc.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.99.107' (ECDSA) to the list of known hosts.
docker@vb1:~$ exit
# Now you can just use normal scp or rsync:
$ scp -pr foodir vb1:
b 100% 0 0.0KB/s 00:00
a 100% 0 0.0KB/s 00:00
$ rsync -av foodir vb1:
sending incremental file list
sent 100 bytes received 17 bytes 234.00 bytes/sec
total size is 0 speedup is 0.00
# Finished with the machine so delete all trace of it:
$ docker-machine rm vb1
About to remove vb1
WARNING: This action will delete both local reference and remote instance.
Are you sure? (y/n): y
Successfully removed vb1
$ docker-machine-add-ssh -d vb1
vb1 entry deleted from /home/mark/.ssh/config.DEFAULT ARGUMENTS
You can add default arguments to a personal configuration file
~/.config/docker-machine-add-ssh-flags.conf. If that file exists then
each line of arguments will be concatenated and automatically prepended
to your docker-machine-add-ssh command line arguments. Comments in the
file (i.e. starting with "#") are ignored.
This allow you to set default preferred starting arguments to
docker-machine-add-ssh. Type docker-machine-add-ssh -h to see the
arguments supported.
E.g. echo "-r" >~/.config/docker-machine-add-ssh-flags.conf to make
docker-machine-add-ssh always replace existing host entries even if
they already exist.
INSTALLATION
Ensure
docker-machine
is installed.
Arch users can install docker-machine-add-ssh from the AUR.
Python 3.7 or later is required. Note docker-machine-add-ssh is on
PyPI so just ensure
that python3-pip and python3-wheel are installed then type the
following to install (or upgrade):
$ sudo pip3 install -U docker-machine-add-sshAlternately, do the following to install from the source repository.
$ git clone http://github.com/bulletmark/docker-machine-add-ssh
$ cd docker-machine-add-ssh
# Install globally ..
$ sudo pip3 install -U .
# Or, install for yourself only ..
$ pip3 install -U .UPGRADE
$ cd docker-machine-add-ssh # Source dir, as above
$ git pull
$ sudo pip3 install -U .
# Or, pip3 install -U .REMOVAL
$ sudo pip3 uninstall docker-machine-add-ssh
# Or, pip3 uninstall docker-machine-add-sshLICENSE
Copyright (C) 2020 Mark Blakeney. This program is distributed under the terms of the GNU General Public License. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License at http://www.gnu.org/licenses/ for more details.
