import asyncio
from huber import Bath

async def get():
    async with Bath('192.168.1.100') as bath:
        print(await bath.get())

asyncio.run(get())

{
    'on': False,               # Temperature control (+pump) active
    'temperature': {
        'bath': 23.49,         # Internal (bath) temperature, °C
        'setpoint': 20.0       # Temperature setpoint, °C
    },
    'pump': {
        'pressure': 0.0,       # Pump head pressure, mbar
        'speed': 0,            # Pump speed, rpm
        'setpoint': 0          # Pump speed setpoint, rpm
    },
    'status': {
        'circulating': False,  # True if device is circulating
        'controlling': False,  # True if temperature control is active
        'error': False,        # True if an uncleared error is present
        'pumping': False,      # True if pump is on
        'warning': False       # True if an uncleared warning is present
    },
    'fill': 0.0,               # Oil level, [0, 1]
    'maintenance': 338,        # Time until maintenance alarm, days
    'warning': {               # Only present if warning is detected
        'code': -1,
        'condition': '',
        'recovery': '',
        'type': ''
    },
    'error': {                 # Only present if error is detected
        'code': -1,
        'condition': '',
        'recovery': '',
        'type': ''
    }
}

await bath.get_setpoint()             # °C
await bath.get_bath_temperature()     # °C
await bath.get_process_temperature()  # °C (optionally installed)
await bath.get_pressure()             # mbar
await bath.get_pump_speed()           # rpm
await bath.get_fill_level()           # [0, 1]
await bath.get_next_maintenance()     # days
await bath.get_status()               # boolean dictionary
await bath.get_warning()              # None or dictionary
await bath.get_error()                # None or dictionary

await bath.start()
await bath.stop()
await bath.set_setpoint(50)      # °C
await bath.set_pump_speed(2000)  # rpm
await bath.clear_warning()
await bath.clear_error()