PyRevive

Revive Hardware Restarter API Library

This Python package is meant for interfacing with the Revive Hardware Restarter HTTP API. Revive is a hardware restarter and monitor for cryptocurrency mining rigs.

You can find out more and buy one here

If you find this library helpful, donations are greatly appreciated:

• Ethereum: 0x7472a4812200fc320793a946f027d559e63b164d
• Ethereum Classic: 0x20282a304c20399b6534cef6196a99978cb89588
• Bitcoin: 1LvnfMGfz8xTaZgi25DiRFaJoFvpAPncT5
• Bitcoin Cash: 1Ec3CPq3WPsWT7fQaDGgTYkVPNtMZ3CVaA
• Litecoin: LSZBbS7EsKnjXQ1FKxYuAmR5quzEazXfm1
• Electroneum: etnk3yDpybAEBqz3nq63qmev4thRi9eFH64CVKzZc2w3A7vehpZkGvd97uSWxtmtAwjTnfKEp9Rup3md7nZyu9Q49VzZQKhxWN

Installing using PIP

pip install pyrevive

Installing from source

git clone https://github.com/RevolutionRigs/pyrevive.git
cd pyrevive/
pip install .

If you do not want to install using pip you may install using setup.py

git clone https://github.com/RevolutionRigs/pyrevive.git
cd pyrevive/
python setup.py install

Importing

import pyrevive

Connecting

The connect() method takes two arguments: host[:port], authorizationKey The authorization key can be found on the bottom of your Revive.

revive = pyrevive.connect("192.168.1.254", "authorizationKey")

Version

Get the current version of PyRevive

print(revive.__version__)

Power

Perform power on, off, reset functions on a Revive port (aka rig)

Power on rig 1

revive.power.on(1)

Power off rig 1

revive.power.off(1)

Power cycle rig 1

All cycle/reset/restart methods are aliases of one another and do the same thing

revive.power.cycle(1)
revive.power.reset(1)
revive.power.restart(1)

Power on rigs 1-16

for rig in range(1, 17):
    revive.power.on(rig)

Device

Device specific actions and authorization

Device Authorization check

revive.device.auth()

Get Device ID

revive.device.id()

Device Hello message (currently returns device ID)

revive.device.hello()

Rig

Rig specific methods: get() and update()

Rig.Get

The revive.rig.get() method takes an integer (1-16) as the rig/port number or no argument to get information on all port numbers. Returns a JSON string with the values. The API is currently broken on Revive and only port 1 is returned, regardless of which port you specify.

# Get information about all ports/rigs
res = revive.rig.get()
print(res)

# Get information about port/rig 1
res = revive.rig.get(1)
print(res)

Rig.Update

Updates the rig (aka port) with the specified information. It takes a Python dict as an argument. Possible fields are:

• port (int, 1-16, required) - physical port which will be updated. We don't have rig id, instead we use this port number
• name (char) - name of the rig
• ip (IP address) - IP address of the rig, used when mode is set to watchdog
• mode (char, manual|watchdog|api)
• maintenance (boolean) - not used for now

payload = { "port": 3, "name": "RRMS40U", "ip": "192.168.100.101", "mode": "manual", "maintenance": False }
res = revive.rig.update(payload)
print(res)

Config

Retrieves and sets network and watchdog information on the Revive.

Config.Network

The revive.config.network object sets the following read-write variables:

* revive.config.network.mode
* revive.config.network.ip
* revive.config.network.netmask
* revive.config.network.gateway
* revive.config.network.primaryDNS
* revive.config.network.secondaryDNS

Viewing

You can view the current settings in two ways. Using a helper method show():

revive.config.network.show()

Or each individual setting:

print(revive.config.network.mode)
print(revive.config.network.ip)
print(revive.config.network.netmask)
print(revive.config.network.gateway)
print(revive.config.network.primaryDNS)
print(revive.config.network.secondaryDNS)

There is also a dictionary on the network object 'settings' that you can view the settings as well:

print(revive.config.network.settings)

Updating

The individual settings are read-write and can be changed and then saved back to the Revive using the save() method:

revive.config.network.show()

revive.config.network.ip = "10.1.1.254"
revive.config.network.netmask = "255.255.255.0"
revive.config.network.gateway = "10.1.1.1"
revive.config.network.primaryDNS = "8.8.8.8"
revive.config.network.secondaryDNS = "8.8.4.4"

res = revive.config.network.save()
print(res)

revive.config.network.show()

Config.Watchdog

The Revive watchdog feature has 3 settings you can modify. The revive.config.watchdog object has three read-write variables:

* revive.config.watchdog.settings
* revive.config.watchdog.pingInterval
* revive.config.watchdog.firstResetAfter
* revive.config.watchdog.anotherResetEvery

Viewing

You can view the current settings in two ways. Using a helper method show():

revive.config.watchdog.show()

Or you can view the settings individually:

print(revive.config.watchdog.settings)
print(revive.config.watchdog.pingInterval)
print(revive.config.watchdog.firstResetAfter)
print(revive.config.watchdog.anotherResetEvery)

There is also a dictionary on the watchdog object 'settings' that you can view the settings as well:

print(revive.config.watchdog.settings)

Updating

The individual settings are read-write and can be changed and then saved back to the Revive using the save() method:

revive.config.watchdog.show()

revive.config.watchdog.pingInterval = "5"
revive.config.watchdog.firstResetAfter = "90"
revive.config.watchdog.anotherResetEvery = "120"

res = revive.config.watchdog.save()
print(res)

revive.config.watchdog.show()