PyRPIIC
A [Py]thon 3 addon for [R]aspberry [Pi] that enables [i]nterfacing w/ a variety of low-level board [IC]s.
Compatibility
- Raspberry Pi Models: A, B (revisions 1.0 and 2.0), A+, B+, 2, 3, 3+, 3 A+, 4, Compute Module 3, Zero.
- Python 3.7+
Install
Install the latest from PyPi:
pip install pyrpiic
Modules
Clocks
- LMK612
- SI570
EEPROMs
- Generic
- M24C02
I2C-GPIO Expanders
- TCA6416A
Sensors
- LDC1412
- LDC1414
- LDC1612
- LDC1614
Examples
Clocks (Programmable Oscillators)
from pyrpio.i2c import I2C
from pyrpiic.clock.lmk61e2 import LMK61E2
# Create and open I2C-3 bus
i2c3 = I2C('/dev/i2c-3')
i2c3.open()
# Create clock
clock = LMK61E2(i2c3, 0x5A)
# Perform various clock operations
clock.set_frequency(156_250_000)
freq, regs = clock.get_frequency()
clock.regs2freq(regs)
clock.set_registers(regs)
# Close I2C-3 bus
i2c3.close()I2C-GPIO Expander Example
from pyrpio.i2c import I2C
from pyrpiic.ioexpander.tca6416a import TCA6416A
# Create and open I2C-3 bus
i2c3 = I2C('/dev/i2c-3')
i2c3.open()
# Create gpio expander
gpio_exp = TCA6416A(i2c3, 0x21)
# Set GPIO P00 as output pulled high
gpio_exp.set_gpio_direction('P00', 'OUT')
gpio_exp.set_gpio_output('P00', high=True)
# Set GPIO P01 as input w/ flipped polarity and read value
gpio_exp.set_gpio_direction('P01', 'IN')
gpio_exp.set_gpio_polarity('P01', flipped=True)
gpio_exp.get_gpio_input('P01')
# Close I2C-3 bus
i2c3.close()
