Python RS232 API for Multi-Zone Amps

Library for RS232 serial communication to Xantech, Monoprice, Dayton Audio, Soundavo, and other multi-zone amps. This supports any serial protocol for communicating with the amps, including RS232 ports, USB serial ports, and possibly the RS232-over-IP interface for more recent Xantech amps. See below for exactly which amplifier models are supported.

GOAL: To eventually merge this with pymonoprice and get rid of a separate implementation.

The Monoprice version was originally created by Egor Tsinko for use with Home-Assistant.

Support

Visit the community support discussion thread for issues with this library.

Usage

For Monoprice and Dayton Audio 6-zone amplifiers:

from pyxantech import get_amp_controller

zone = 11 # (11 = amp 1/destination 1)
amp = get_amp_controller('monoprice6', '/dev/ttyUSB0')

# Turn off zone
amp.set_power(zone, False)

# Mute zone
amp.set_mute(zone, True)

# Set volume for zone
amp.set_volume(zone, 15)

# Set source 1 for zone
amp.set_source(zone, 1)

For Xantech 8-zone amplifiers:

from pyxantech import get_amp_controller

zone = 12
amp = get_amp_controller('xantech8', '/dev/ttyUSB0')

amp.set_source(zone, 3) # select source 3

See also example.py for a more complete example.

Usage with asyncio

With the asyncio flavor, all methods of the controller objects are coroutines:

import asyncio
from pyxantech import async_get_amp_controller

async def main(loop):
    amp = await async)get_amp_controller('monoprice6', '/dev/ttyUSB0', loop)
    zone_status = await amp.zone_status(11)
    if zone_status.power:
        await amp.set_power(zone_status.zone, False)

loop = asyncio.get_event_loop()
loop.run_until_complete(main(loop))

Supported Multi-Zone Amps

• The Monoprice MPR-SG6Z and Dayton Audio DAX66 appear to have licensed or copied the serial interface from Xantech. Both Monoprice and Dayton Audio use a version of the Xantech multi-zone controller protocol.
• Soundavo WS66i is an updated version of the Monoprice 10761 which includes 2 wireless streamers, IP/telnet based control, etc. It has not been tested with this, but should use the monoprice6 integration when RS232 controlled.

Xantech High-Density Cable Models

Some Xantech MX88/MX88ai models use high-density HD15 (or DE15) connectors for rear COM ports, thus requiring Xantech's "DB15 to DB9" adapter cable (PN 05913665). The front DB9 RS232 and USB COM ports cannot be used for device control on these models. Instead, use the rear COM ports which are already wired as a 'null modem' connection, so no use of null modem cable is required as the Transmit and Receive lines have already been interchanged.

The pinouts as documented in the Xantech MX88 manual:

See Also

• Protocol Definitions - Xantech / Monoprice / Sonance (reusable in other projects)
• Hardware Specifications - Xantech / Monoprice / Sonance (reusable in other projects)

#@## Other

• Home Assistant integration
• Monoprice RS232 serial protocol manual
• Monoprice RS232 serial protocol control
• Xantech DIY System
• Monoprice 6 ESP32 to RS232 custom hardware

Community Engagement

Sites with active community engagement around the Xantech, Monoprice, and Daytona AUdio multi-zone amplifiers:

• AVS Forum: Monoprice 6
• http://cocoontech.com/forums/topic/25893-monoprice-multi-zone-audio/
• Home Assistant: Monoprice 6