Sixfab RPi CellularIoT App Shield
Repository of Python Library for Sixfab RPi Cellular IoT Shield and Sixfab RPi Cellular IoT Application Shield
Library Installation
Manual Installation
git clone https://github.com/sixfab/Sixfab_RPi_CellularIoT_Library.git
cd Sixfab_RPi_CellularIoT_Library
sudo python3 setup.py install
Install with pip3
Use pip3 to install from PyPI.
sudo pip3 install sixfab-cellulariot
Test
Enable serial_hw
and I2C
interfaces by following instructions below:
- Run
sudo raspi-config
- Select
5 Interfacing Options
- Enable
P5 I2C
- For
P6 Serial
- Disable
Login shell to be accessible over serial
- Enable
Serial port hardware
- Disable
- Finish
- Reboot
- It's done.
cd sample
python3 sensor_test.py #for testing sensor_test example
Examples
** basicUDP
** sensorTest
Tutorials
** Basic UDP Communication Tutorial for Sixfab RPi Cellular IoT Application Shield
** Sensor Test Tutorial for Sixfab RPi Cellular IoT Application Shield
Pinout
Sixfab RPi Cellular IoT Application Shield
Attention
! All data pins work with 3.3V reference. Any other voltage level should harm your hat or RPI.