vpl

Vide Pipe Line

installation

Run pip3 install vpl (it's on pypi)

Or pip3 install -e git://github.com/chemicaldevelopment/vpl (for development, i.e. unstable builds)

usage

It comes with a simple viewer, run:

python3 -mvpl --help

You can use import vpl in your code

exposure settings

Exposure settings are extremely finicky to get working. Here's a few commands to try:

First, set the auto control cutoff to 1:

v4l2-ctl -d /dev/video0 -c exposure_auto=1

Then, try setting the exposure value to various values between -100 and +100:

v4l2-ctl -d /dev/video0 -c exposure_absolute=-30

v4l2-ctl -d /dev/video0 -c exposure_absolute=0

v4l2-ctl -d /dev/video0 -c exposure_absolute=0.5

v4l2-ctl -d /dev/video0 -c exposure_absolute=20

The optimal low/medium light setting for the Micro$oft Lifecam is:

v4l2-ctl -d /dev/video0 -c exposure_absolute=20.9

Use this command:

v4l2-ctl --all

to print settings (and their defaults). This is the most important v4l command

Run through setting all these to defaults

Here are the defaults for Micro$oft Lifecam:

Streaming Parameters Video Capture:
	Capabilities     : timeperframe
	Frames per second: 30.000 (30/1)
	Read buffers     : 0
                     brightness (int)    : min=30 max=255 step=1 default=133 value=133
                       contrast (int)    : min=0 max=10 step=1 default=5 value=5
                     saturation (int)    : min=0 max=200 step=1 default=83 value=83
 white_balance_temperature_auto (bool)   : default=1 value=1
           power_line_frequency (menu)   : min=0 max=2 default=2 value=2
      white_balance_temperature (int)    : min=2800 max=10000 step=1 default=4500 value=4500 flags=inactive
                      sharpness (int)    : min=0 max=50 step=1 default=25 value=25
         backlight_compensation (int)    : min=0 max=10 step=1 default=0 value=5
                  exposure_auto (menu)   : min=0 max=3 default=1 value=1
              exposure_absolute (int)    : min=5 max=20000 step=1 default=156 value=40
                   pan_absolute (int)    : min=-201600 max=201600 step=3600 default=0 value=0
                  tilt_absolute (int)    : min=-201600 max=201600 step=3600 default=0 value=0
                  zoom_absolute (int)    : min=0 max=10 step=1 default=0 value=0

Use the script utils/reset_lifecam.sh