srawlins-gmp

gmp is a library providing Ruby bindings to GMP library.


License
Other
Install
gem install srawlins-gmp -v 0.1.1

Documentation

gmp

Build Status

gmp is a Rubygem providing Ruby bindings to the GMP library, and to the MPFR library (optional). Here is the introduction paragraph at GMP's homepage:

GMP is a free library for arbitrary precision arithmetic, operating on signed integers, rational numbers, and floating point numbers. There is no practical limit to the precision except the ones implied by the available memory in the machine GMP runs on. GMP has a rich set of functions, and the functions have a regular interface.

The main target applications for GMP are cryptography applications and research, Internet security applications, algebra systems, computational algebra research, etc.

GMP is carefully designed to be as fast as possible, both for small operands and for huge operands. The speed is achieved by using fullwords as the basic arithmetic type, by using fast algorithms, with highly optimised assembly code for the most common inner loops for a lot of CPUs, and by a general emphasis on speed.

GMP is faster than any other bignum library. The advantage for GMP increases with the operand sizes for many operations, since GMP uses asymptotically faster algorithms.

The first GMP release was made in 1991. It is continually developed and maintained, with a new release about once a year.

GMP is distributed under the GNU LGPL. This license makes the library free to use, share, and improve, and allows you to pass on the result. The license gives freedoms, but also sets firm restrictions on the use with non-free programs.

GMP is part of the GNU project. For more information about the GNU project, please see the official GNU web site.

GMP's main target platforms are Unix-type systems, such as GNU/Linux, Solaris, HP-UX, Mac OS X/Darwin, BSD, AIX, etc. It also is known to work on Windoze in 32-bit mode.

GMP is brought to you by a team listed in the manual.

GMP is carefully developed and maintained, both technically and legally. We of course inspect and test contributed code carefully, but equally importantly we make sure we have the legal right to distribute the contributions, meaning users can safely use GMP. To achieve this, we will ask contributors to sign paperwork where they allow us to distribute their work."

Support

  • GMP 4.3.x and GMP 5.x are each supported against Ruby (MRI) 1.9.x, 2.0.0, and 2.1.0. GMP 5.1.x is the only version of GMP that has been tested recently.
  • MPFR 3.x is supported.
  • Other Ruby platforms (such as Rubinius and JRuby) should be supported, but have not been tested recently.

Previously

Previously, on version 0.5.47, this gem was verified as functioning in the following combinations:

Platform Ruby GMP (MPFR)
Linux (Ubuntu NR 10.04) on x86 (32-bit) (MRI) Ruby 1.8.7 GMP 4.3.1 (2.4.2)
GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
(MRI) Ruby 1.9.1 GMP 4.3.1 (2.4.2)
GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
(MRI) Ruby 1.9.2 GMP 4.3.1 (2.4.2)
GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
Linux (Ubuntu 10.04) on x86_64 (64-bit) (MRI) Ruby 1.8.7 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
(MRI) Ruby 1.9.1 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
(MRI) Ruby 1.9.2 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
(RBX) Rubinius 1.1.0 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
Mac OS X 10.6.8 on x86_64 (64-bit) (MRI) Ruby 1.8.7 GMP 4.3.2 (2.4.2)
GMP 5.0.5 (3.1.1)
(MRI) Ruby 1.9.3 GMP 4.3.2 (2.4.2)
GMP 5.0.5 (3.1.1)
(RBX) Rubinius 1.1.0 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
Windows 7 on x86_64 (64-bit) (MRI) Ruby 1.8.7 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
(MRI) Ruby 1.9.1 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
(MRI) Ruby 1.9.2 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)
Windows XP on x86 (32-bit) (MRI) Ruby 1.9.1 GMP 4.3.2 (2.4.2)
GMP 5.0.1 (3.0.0)

Authors

  • Tomasz Wegrzanowski
  • srawlins

Constants

The GMP module includes the following constants. Mathematical constants, such as pi, are defined under class methods of GMP::F, listed below.

  • GMP::GMP_VERSION - A string like "5.0.1"
  • GMP::GMP_CC - The compiler used to compile GMP
  • GMP::GMP_CFLAGS - The CFLAGS used to compile GMP
  • GMP::GMP_BITS_PER_LIMB The number of bits per limb
  • GMP::GMP_NUMB_MAX - The maximum value that can be stored in the number part of a limb

If MPFR is available:

  • GMP::MPFR_VERSION - A string like "2.4.2"
  • GMP::MPFR_PREC_MIN - The minimum precision available
  • GMP::MPFR_PREC_MAX - The maximum precision available
  • GMP::GMP_RNDN - The constant representing "round to nearest"
  • GMP::GMP_RNDZ - The constant representing "round toward zero"
  • GMP::GMP_RNDU - The constant representing "round toward plus infinity"
  • GMP::GMP_RNDD - The constant representing "round toward minus infinity"

New in MPFR 3.0.0:

  • GMP::MPFR_RNDN
  • GMP::MPFR_RNDZ
  • GMP::MPFR_RNDU
  • GMP::MPFR_RNDD
  • GMP::MPFR_RNDA - The constant representing "round away from zero"

Classes

The GMP module is provided with following classes:

  • GMP::Z - infinite precision integer numbers
  • GMP::Q - infinite precision rational numbers
  • GMP::F - arbitrary precision floating point numbers
  • GMP::RandState - states of individual random number generators

Numbers are created by using new(). Constructors can take following arguments:

GMP::Z.new()
GMP::Z.new(Fixnum)
GMP::Z.new(Bignum)
GMP::Z.new(GMP::Z)
GMP::Z.new(Float)
GMP::Z.new(GMP::F)
GMP::Z.new(String)
GMP::Q.new()
GMP::Q.new(Fixnum)
GMP::Q.new(GMP::Z)
GMP::Q.new(GMP::Q)
GMP::Q.new(String)
GMP::Q.new(any GMP::Z initializer)
GMP::Q.new(Fixnum, Fixnum)
GMP::Q.new(any GMP::Z initializer, any GMP::Z initializer)
GMP::F.new()
GMP::F.new(GMP::Z, precision=0, rounding_mode=default)
GMP::F.new(GMP::Q, precision=0, rounding_mode=default)
GMP::F.new(GMP::F, precision=0, rounding_mode=default)
GMP::F.new(String, precision=0)
GMP::F.new(String, precision=0, base=10)
GMP::F.new(String, precision=0, base=10, rounding_mode=default)
GMP::F.new(Fixnum, precision=0, rounding_mode=default)
GMP::F.new(Bignum, precision=0, rounding_mode=default)
GMP::F.new(Float,  precision=0, roundung_mode=default)
GMP::F.new_2exp(Fixnum, exp, precision=0, rounding_mode=default)
GMP::F.new_2exp(Bignum, exp, precision=0, rounding_mode=default)
GMP::F.new_2exp(GMP::Z, exp, precision=0, rounding_mode=default)
GMP::RandState.new(\[algorithm\] \[, algorithm_args\])

You can also call them as:

GMP.Z(args)
GMP.Q(args)
GMP.F(args)
GMP.RandState()

Methods

GMP::Z, GMP::Q and GMP::F
  +                        addition
  -                        substraction
  *                        multiplication
  /                        division
  to_s                     convert to string. For GMP::Z and GMP::F, this
                           method takes one optional argument, a base. The
                           base can be a Fixnum in the ranges \[2, 62\] or
                           \[-36, -2\] or a Symbol: one of :bin, :oct,
                           :dec, or :hex.
  inspect                  alias for #to_s
  -@                       negation
  neg!                     in-place negation
  abs                      absolute value
  abs!                     in-place absolute value
  coerce                   promotion of arguments
  ==                       equality test
  <=>, >=, >, <=, <        comparisons
class methods of GMP::Z
  fac(n)                   factorial of n
  2fac(n), double_fac(n)   double factorial of n
  mfac(n)                  m-multi-factorial of n
  primorial(n)             primorial of n
  fib(n)                   nth Fibonacci number
  fib2(n)                  nth and (n-1)th Fibonacci numbers
  pow(n,m)                 n to mth power
GMP::Z and GMP::Q
  swap                     efficiently swap contents of two objects, there
                           is no GMP::F.swap because various GMP::F objects
                           may have different precisions, which would make
                           them unswapable
GMP::Z
  to_i                     convert to Fixnum or Bignum
  add!                     in-place addition
  sub!                     in-place subtraction
  addmul!(b,c)             in-place += b*c
  submul!(b,c)             in-place -= b*c
  tdiv,fdiv,cdiv           truncate, floor and ceil division
  tmod,fmod,cmod           truncate, floor and ceil modulus
  >>                       shift right, floor
  divisible?(b)            true if divisible by b
  congruent?(c,d)          true if congruent to c modulus d
  **                       power
  powmod                   power modulo
  \[\],\[\]=                   testing and setting bits (as booleans)
  scan0,scan1              starting at bitnr (1st arg), scan for a 0 or 1
                           (respectively), then return the index of the
                           first instance.
  cmpabs                   comparison of absolute value
  com                      2's complement
  com!                     in-place 2's complement
  &,|,^                    logical operations: and, or, xor
  even?                    is even
  odd?                     is odd
  <<                       shift left
  tshr                     shift right, truncate
  lastbits_pos(n)          last n bits of object, modulo if negative
  lastbits_sgn(n)          last n bits of object, preserve sign
  power?                   is perfect power
  square?                  is perfect square
  sqrt                     square root
  sqrt!                    change the object into its square root
  sqrtrem                  square root, with remainder
  root(n)                  nth root
  rootrem(n)               nth root, with remainder
  probab_prime?            0 if composite, 1 if probably prime, 2 if
                           certainly prime
  nextprime                next *probable* prime
  nextprime!               change the object into its next *probable* prime
  gcd, gcdext, gcdext2     greatest common divisor
  lcm                      least common multiple
  invert(m)                invert mod m
  jacobi                   jacobi symbol
  legendre                 legendre symbol
  remove(n)                remove all occurences of factor n
  popcount                 the number of bits equal to 1
  hamdist                  the hamming distance between two integers
  out_raw                  output to IO object
  inp_raw                  input from IO object
  export                   export to a byte array (String)
  import                   import from a byte array (String)
  sizeinbase(b)            digits in base b
  size_in_bin              digits in binary
  size                     number of limbs
GMP::Q
  num                      numerator
  den                      denominator
  inv                      inversion
  inv!                     in-place inversion
  floor,ceil,trunc         nearest integer
class methods of GMP::F
  default_prec             get default precision
  default_prec=            set default precision
  fac(n)                   new GMP::F, equal to factorial of n
GMP::F
  prec                     get precision
  floor,ceil,trunc         nearest integer, GMP::F is returned, not GMP::Z
  floor!,ceil!,trunc!      in-place nearest integer
GMP::RandState
  seed(integer)            seed the generator with a Fixnum or GMP::Z
  urandomb(fixnum)         get uniformly distributed random number between 0
                           and 2^fixnum-1, inclusive
  urandomm(integer)        get uniformly distributed random number between 0
                           and integer-1, inclusive
GMP (timing functions for GMPbench (0.2))
  cputime                  milliseconds of cpu time since Ruby start
  time                     times the execution of a block

*only if MPFR is available*
class methods of GMP::F
  nan                      returns NaN
  inf(sign = 1)            returns Inf or -Inf
  zero(sign = 1)           returns zero or -zero
  const_log2               returns the natural log of 2
  const_pi                 returns pi
  const_euler              returns euler
  const_catalan            returns catalan
  emin                     returns the smallest allowed exponent
  emax                     returns the largest allowed exponent
  emin=(exp)               sets the smallest allowed exponent
  emax=(exp)               sets the largest allowed exponent
  emin_min                 returns the smallest exponent allowed for GMP::F.emin=
  emin_max                 returns the largest exponent allowed for GMP::F.emin=
  emax_min                 returns the smallest exponent allowed for GMP::F.emax=
  emax_max                 returns the largest exponent allowed for GMP::F.emax=
  mpfr_buildopt_tls_p      returns whether MPFR was built as thread safe
  mpfr_buildopt_decimal_p  returns whether MPFR was compiled with decimal
                           float support
GMP::F
  frexp                    frexp
  lessgreater?(y)          x < y or y < x?
  unordered?(y)            either x or y is NaN?
  sqrt                     square root of the object
  rec_sqrt                 square root of the recprical of the object
  cbrt                     cube root of the object
  **                       power
  log                      natural logarithm of object
  log2                     binary logarithm of object
  log10                    decimal logarithm of object
  exp                      e^object
  exp2                     2^object
  exp10                    10^object
  log1p                    the same as (object + 1).log, with better
                           precision
  expm1                    the same as (object.exp) - 1, with better
                           precision
  eint                     exponential integral of object
  li2                      real part of the dilogarithm of object
  gamma                    Gamma fucntion of object
  lngamma                  logarithm of the Gamma function of object
  digamma                  Digamma function of object (MPFR_VERSION >= "3.0.0")
  zeta                     Reimann Zeta function of object
  erf                      error function of object
  erfc                     complementary error function of object
  j0                       first kind Bessel function of order 0 of object
  j1                       first kind Bessel function of order 1 of object
  jn                       first kind Bessel function of order n of object
  y0                       second kind Bessel function of order 0 of object
  y1                       second kind Bessel function of order 1 of object
  yn                       second kind Bessel function of order n of object
  agm                      arithmetic-geometric mean
  hypot
  cos                      \
  sin                      |
  tan                      |
  sin_cos                  |
  sec                      |
  csc                      |
  cot                      |
  acos                     |
  asin                     |
  atan                     | trigonometric functions
  atan2                    |
  cosh                     | of the object
  sinh                     |
  tanh                     |
  sinh_cosh                |
  sec                      |
  csc                      |
  cot                      |
  acosh                    |
  asinh                    |
  atanh                    /
  nan?                     \
  infinite?                | type of floating point number
  finite?                  |
  number?                  |
  regular?                 / (MPFR_VERSION >= "3.0.0")
GMP::RandState
  mpfr_urandomb(prec = default)   get uniformly distributed random floating-point
                                  number within 0 <= rop < 1
  mpfr_urandom(prec = default)    get uniformly distributed random floating-point
                                  number (MPFR_VERSION >= "3.0.0")

Functional Mappings

In order to align better with the GMP paradigms of using return arguments, I have started creating "functional mappings", singleton methods that map directly to functions in GMP. These methods take return arguments, so that passing an object to a functional mapping may change the object itself. For example:

a = GMP::Z(0)
b = GMP::Z(13)
c = GMP::Z(17)
GMP::Z.add(a, b, c)
a  #=> 30

Here's a fun list of all of the functional mappings written so far:

GMP::Z
  .abs          .add          .addmul       .cdiv_q_2exp  .cdiv_r_2exp  .com
  .congruent?   .divexact     .divisible?   .fdiv_q_2exp  .fdiv_r_2exp  .lcm
  .mul          .mul_2exp
  .neg          .nextprime    .sqrt         .sub          .submul       .tdiv_q_2exp
  .tdiv_r_2exp

Method Tables

The following is organized in the same categories as in the GMP and MPFR manuals.

Integer Functions

Assigning Integers

GMP Function GMP::Z method
mpz_swap GMP::Z#swap

Converting Integers

4x C functions mapped to 3x Ruby methods; 1x unmapped C function
GMP Function GMP::Z method
mpz_get_ui
mpz_get_si
GMP::Z#to_i
mpz_get_d GMP::Z#to_d
mpz_get_d_2exp not implemented yet
mpz_get_str GMP::Z#to_s

Integer Arithmetic

12x C functions mapped to 19x Ruby methods; 2x unmapped C functions
GMP Function GMP::Z method
mpz_add
mpz_add_ui
GMP::Z#+
GMP::Z#add! (destructive method)
GMP::Z.add (in-place singleton method)
mpz_sub
mpz_sub_ui
mpz_ui_sub (never used)
GMP::Z#-
GMP::Z#sub! (destructive method)
GMP::Z.sub (in-place singleton method)
mpz_mul
mpz_mul_si
mpz_mul_ui (not used yet)
GMP::Z#*
GMP::Z.mul (in-place singleton method)
mpz_addmul
mpz_addmul_ui
GMP::Z#addmul! (destructive method)
GMP::Z.addmul (in-place singleton method)
mpz_submul
mpz_submul_ui
GMP::Z#submul! (destructive method)
GMP::Z.submul (in-place singleton method)
mpz_mul_2exp GMP::Z.mul_2exp (in-place singleton method)
mpz_neg GMP::Z@-
GMP::Z#neg! (destructive method)
GMP::Z.neg (in-place singleton method)
mpz_abs GMP::Z#abs
GMP::Z#abs! (destructive method)
GMP::Z.abs (in-place singleton method)

Integer Division

26x C functions mapped to 18x Ruby methods; 11x unmapped C functions
GMP Function GMP::Z method
mpz_cdiv_q
mpz_cdiv_q_ui
GMP::Z#cdiv
mpz_cdiv_r
mpz_cdiv_r_ui
GMP::Z#cmod
mpz_cdiv_qr
mpz_cdiv_qr_ui
not implemented yet
mpz_cdiv_ui not implemented yet
mpz_cdiv_q_2exp
mpz_cdiv_r_2exp
GMP::Z.cdiv_q_2exp (in-place singleton method)
GMP::Z.cdiv_r_2exp (in-place singleton method)
mpz_fdiv_q
mpz_fdiv_q_ui
GMP::Z#fdiv
mpz_fdiv_r
mpz_fdiv_r_ui
GMP::Z#fmod
mpz_fdiv_qr
mpz_fdiv_qr_ui
not implemented yet
mpz_fdiv_ui not implemented yet
mpz_fdiv_q_2exp
mpz_fdiv_r_2exp
GMP::Z.fdiv_q_2exp (in-place singleton method)
GMP::Z.fdiv_r_2exp (in-place singleton method)
mpz_tdiv_q
mpz_tdiv_q_ui
GMP::Z#tdiv
mpz_tdiv_r
mpz_tdiv_r_ui
GMP::Z#tmod
mpz_tdiv_qr
mpz_tdiv_qr_ui
not implemented yet
mpz_tdiv_ui not implemented yet
mpz_tdiv_q_2exp
mpz_tdiv_r_2exp
GMP::Z.tdiv_q_2exp (in-place singleton method)
GMP::Z.tdiv_r_2exp (in-place singleton method)
mpz_mod
mpz_mod_ui
GMP::Z#mod
mpz_divexact
mpz_divexact_ui
GMP::Z.divexact (in-place singleton method)
mpz_divisible_p
mpz_divisible_ui_p
GMP::Z#divisible?
GMP::Z.divisible? (in-place singleton method)
mpz_divisible_2exp_p not implemented yet
mpz_congruent_p
mpz_congruent_ui_p
GMP::Z#congruent?
GMP::Z.congruent? (in-place singleton method)
mpz_congruent_2exp_p not implemented yet

Integer Exponentiation

Integer Roots

Number Theoretic Functions

Integer Comparisons

Integer Logic and Bit Fiddling

I/O of Integers

Integer Random Numbers

Integer Import and Export

Miscellaneous Integer Functions

Documentation

  • This README
  • Loren Segal and the guys at RubyGems.org are awesome: YARDoc.
  • There should be a manual.pdf here. I spend waaay too much time working on this, but it looks very pretty.
  • CHANGELOG

Testing

Tests can be run with rake test. I like to run tests and print out a quick report of Ruby, GMP, and MPFR versions with rake report. You can precede any rake task with GMP=gmp_install_dir and MPFR=mpfr_install_dir (or MPFR=--no-mpfr) to pass --with-gmp-dir and --with-mpfr-dir options to extconf.rb as well.

You can also run tests from an individual file with:

cd test
ruby some_test_file.rb

Known Issues

Don't call GMP::RandState(:lc_2exp_size). Give a 2nd arg.

Don't use multiple assignment (a = b = GMP::Z(0)) with functional mappings:

    >> a = b = GMP::Z(0)
    => 0
    >> GMP::Z.mul(a, GMP::Z(2), GMP::Z(3))
    => nil
    >> a
    => 6
    >> b
    => 6

JRuby has some interesting bugs and flickering tests. GMP::Z(GMP::GMP_NUMB_MAX) for example, blows up.

Precision

Precision can be explicitely set as second argument for GMP::F.new(). If there is no explicit precision, highest precision of all GMP::F arguments is used. That doesn't ensure that result will be exact. For details, consult any paper about floating point arithmetics.

Default precision can be explicitely set by passing 0 as the second argument for to GMP::F.new(). In particular, you can set precision of copy of GMP::F object by:

new_obj = GMP::F.new(old_obj, 0)

Precision argument, and default_precision will be rounded up to whatever GMP thinks is appropriate.

Benchmarking

Please see performance on GitHub.

License

This gem is now licensed under the Apache License Version 2.0.

Todo

  • GMP::Z#to_d_2exp, #kronecker, #bin, ::lucnum2, #combit, #fits_x?
  • GMP::Q#to_s(base), GMP::F#to_s(base) (test it!)
  • benchmark pi
  • a butt-load of functional mappings. 47-ish sets.
  • investigate possible memory leaks when using GMP::Q(22/7) for example
  • beef up r_gmpq_initialize; I don't like to rely on mpz_set_value.
  • finish compile-results.rb
  • check if mpz_mul_ui would optimize GMP::Z#*
  • New in MPFR 3.1.0: mpfr_frexp, mpfr_grandom, mpfr_z_sub, divide-by-zero exception (?)
  • JRuby doesn't like some MPFR stuff, specifically sqrt tests fail.
  • Rubinius in 1.9 mode fails a sprintf test in a minor way.

The below are inherited from Tomasz. I will go through these and see which are still relevant, and which I understand.

  • mpz_fits_* and 31 vs. 32 integer variables
  • check if mpz_addmul_ui would optimize some statements
  • some system that allows using denref and numref as normal ruby objects
  • takeover code that replaces all Bignums with GMP::Z
  • better bignum parser (crawling into the Bignum extension)
  • zero-copy method for strings generation
  • benchmarks against Python GMP and Perl GMP
  • dup methods for GMP::Q and GMP::F
  • integrate F into system
  • should Z.\[\] bits be 0/1 or true/false, 0 is true, which might surprise users
  • any2small_integer()
  • powm with negative exponents
  • check if different sorting of operations gives better cache usage
  • GMP::\* op RubyFloat and RubyFloat op GMP::\*