blooming

version number: 1.0.8 author: Luxebeng

Overview

blooming Framework is a generic open source test automation framework for acceptance test-driven development (ATDD). which is operating system and application independent. The core framework is implemented using Python 3.

Project is hosted on GitHub where you can find source code, an issue tracker, and some further documentation.

Installation

To install use pip:

$ pip install blooming

Or clone the repo:

$ git clone https://github.com/luxebeng/blooming.git
$ python setup.py install

How does it work

The test suites is component with series independent module, and all of them can be executed in sequence.

For each test case, device and configuration file are abstracted as an object. which is defined as a .json file, and all the operation is defined as member function of an object.

For different there are command lists on devices from different vendor, so there is a SAL layer to adapt the commands for different in future. but now it's called directly.

The simple sketch is as follows:

How to use

1 Install the tool at first pip install blooming

2 Configuration file Copy configuration file dev.json and l2ng_conf.json to the folder where the image is.

3 enter the command for upgrade the image and run the test script

[benliu@hwpxe ~]$ blooming -i
Welcome to my interactive program! (type help for a list of commands.)
(blooming) help
 
Documented commands (type help <topic>):
========================================
help  l2ng_testcase  quit  upgrade_image
 
(blooming) help l2ng_testcase
Usage: l2ng_testcase
(blooming) help upgrade_image
Usage: upgrade_image <image_name>
(blooming)

Configuration file

at the root folder, there is 2 json files are provided.

dev.json: which define the device information. which is static for a special devices.

***device information*** 
{
  "bj340g":{
    "device name": "srx340g",            # device name
    "MGT IP address": "10.208.128.161",  # login IP address
    "port number": 22,                   # ssh login portID
    "ssh user": "root",                  # ssh login user
    "passwd": "Embe1mpls"                # ssh login passwd
  }
}

xxxx_conf.json: which is config related information. which is depended on the topology of testbed and configuration.

{
  "bj340g":{
    "l2 port":{
      "ge-0/0/5":{
        "peer":{
          "dev":"bj300a",
          "port":"ge-0/0/5"
        }
      }
    },
    "l3 intf":{
      "irb.20":{
        "ip addr":"20.0.0.20"
      }
    }
  }
}

There is a detail document about L2NG test suites. please refer to documents of L2NG Test suites.

Contributing

TBD