COM-Server

COM-Server is a Python library and a local web server that hosts an API locally and interacts with serial or COM ports. The Python library provides a different way of sending and receiving data from the serial port using a thread, and it also gives a set of tools that simplifies the task of manipulating data to and from the port. Additionally, the server makes it easier for other processes to communicate with the serial port.

The serial communication uses pyserial as its back-end and the server uses flask-restful and Flask. Reading their documentations may help with developing with COM-Server.

NOTE: COM-Server has only been tested on:
Operating systems:

• Ubuntu 20.04 (Focal Fossa)
• Raspberry Pi OS 10 (Buster)
• Mac OS 10.15.x (Catalina)
• Mac OS 11.6 (Big Sur)
• Windows 10

Python versions:

• Python 3.7.2
• Python 3.7.3
• Python 3.8.10
• Python 3.9.7
• Python 3.10.0

Serial ports:

• Arduino UNO
• Arduino Nano

Recommended use

COM-Server is not meant to be used like a normal JSON API, even though it uses Flask and Flask-restful. If there are many different devices accessing the endpoints at the same time, data will be backed up, since the serial communication is relatively slow and things cannot be sent to the serial device at the same time.

The server is recommended to be used like a socket, and it should be used as a way for another process (should be only one; COM-Server has no implemented synchronization) on one computer (could be the same computer or another one on the same network) to communicate with the serial port via pyserial and this Python program.

Installation

NOTE: COM-Server only works on Python >= 3.6.

Using pip:

> pip install -U com-server

For beta releases, use the --pre option:

> pip install --pre com-server

Quickstart

# launches a development server on http://0.0.0.0:8080

import com_server
from com_server.api import Builtins

conn = com_server.Connection(<baud>, "<serport>") 
handler = com_server.RestApiHandler(conn) 
Builtins(handler) 

handler.run_dev(host="0.0.0.0", port=8080) 

conn.disconnect()

Replace "<serport>" and "<baud>" with the serial port and baud rate.

Alternatively, you can use the command line:

> com_server run <baud> <serport>

Again, replace "<serport>" and "<baud>" with the serial port and baud rate.

Links:

• Documentation: https://com-server.readthedocs.io/en/latest/
• Source code: https://github.com/jonyboi396825/COM-Server
• Issue tracker: https://github.com/jonyboi396825/COM-Server/issues
• Contributing: https://github.com/jonyboi396825/COM-Server/blob/master/CONTRIBUTING.md
• Changelog: https://github.com/jonyboi396825/COM-Server/blob/master/CHANGELOG.md