GoPiGo3
The GoPiGo3 is a delightful and complete robot for the Raspberry Pi that turns your Pi into a fully operating robot. GoPiGo3 is a mobile robotic platform for the Raspberry Pi developed by Dexter Industries.
Raspbian for Robots
You can find all software and installation for the GoPiGo3 on an SD Card by using our operating system Raspbian for Robots. You can download and install Raspbian for Robots for free with instructions found here.
You can also purchase an SD Card with the software on it here.
Installation
You can install the GoPiGo3 on your own operating system with the following commands in the command line:
-
Clone this repository onto the Raspberry Pi:
sudo git clone http://www.github.com/DexterInd/GoPiGo3.git /home/pi/Dexter/GoPiGo3
-
Run the install script:
sudo bash /home/pi/Dexter/GoPiGo3/Install/install.sh
-
Reboot the Raspberry Pi to make the settings take effect:
sudo reboot
Quick Install
In order to quick install the GoPiGo3
repository, open up a terminal and type one of the 2 following commands:
- For installing the python packages of the
GoPiGo3
with root privileges (except any other settings that can come with), use the following command:
sudo sh -c "curl -kL dexterindustries.com/update_gopigo3 | bash"
- For installing the python packages of the
GoPiGo3
without root privileges (except any other settings that can come with), use the following command:
curl -kL dexterindustries.com/update_gopigo3 | bash
The same command can be used for updating the GoPiGo3
to the latest version.
License
Please review the LICENSE.md file for license information.