Easily store and replot matplotlib Axes content
Have a plot that takes a long time to create and which you want to overlay
different things onto? You can use matplotlib-aximgcache to save the
intermediate axes content to an image and later replot that same content into a
new axes (in the right place with transparency!) All you need is
.save_ax_to_image and .load_and_plot_image, see below for an example (or
example.ipynb).
Installation
python -m pip install matplotlib-aximgcache
Usage
First, we'll create a reference plot with some shapes that extend to the edges
of the figure and with whitespace in the middle so that we can test that
transparency works. At the end we call .save_ax_to_image(...) to save the
matplotlib.Axes content.
import matplotlib.pyplot as plt
import matplotlib.patches as mpatches
import matplotlib_aximgcache as mpl_aic
fig, ax = plt.subplots()
ax.set_xlim(0, 400)
ax.set_ylim(0, 200)
rects = [
mpatches.Rectangle((0, 0), 100, 200, linewidth=1, edgecolor="none", facecolor="b"),
mpatches.Rectangle(
(400, 0), -100, 200, linewidth=1, edgecolor="none", facecolor="b"
),
mpatches.Rectangle((50, 50), 100, 100, linewidth=1, edgecolor="g", facecolor="r"),
mpatches.Rectangle((250, 50), 100, 100, linewidth=1, edgecolor="g", facecolor="r"),
]
for rect in rects:
ax.add_patch(rect)
# save the content of the axes to a PNG-image so that it can be replotted
# into a new axes later
mpl_aic.save_ax_to_image(ax=ax, fpath="test.png")The figure looks like this:
The stored image looks this (and contains meta-info so we can replot it in the correct location):
Next, we create a new figure with an axes that has different extents than the original axes and has some extra content (a few green rectangles) so we can check alignment and transparency:
fig, ax = plt.subplots(figsize=(8, 8))
ax.set_xlim(-200, 500)
ax.set_ylim(-200, 400)
# add a few green rectangles to show that with changed axes extents
# the loaded image is plotted in the correct place and has transparency
rect = mpatches.Rectangle(
(100, 0), 20, 300, linewidth=1, edgecolor="none", facecolor="g"
)
ax.add_patch(rect)
rect = mpatches.Rectangle(
(300, 0), -20, 300, linewidth=1, edgecolor="none", facecolor="g", zorder=2
)
ax.add_patch(rect)
# add the content of the previous figure's axes from the image stored above
# note that the loaded content is plotted with `zorder=1`, you can change
# this if you want to change the z-ordering relative to other things in your
# new figure
mpl_aic.load_and_plot_image(ax=ax, fpath="test.png")The final figure looks like this:
NB: as you can tell from the above image there is a slight offset issue with the plotted image. If you know what that might be please let me know!
Contributing and inspiration
I got the technique for saving the axes content from ImportantOfBeingErnest
on stackoverflow.
Pull-request welcome!
