from nuheat import NuHeat

# Initalize an API session with your login credentials
api = NuHeat("email@example.com", "your-secure-password")
api.authenticate()

# Fetch a thermostat by serial number / ID. This can be found on the NuHeat website by selecting
# your thermostat and noting the Thermostat ID
thermostat = api.get_thermostat("12345")

# Get the current temperature of the thermostat
thermostat.fahrenheit
thermostat.celsius

# Get the current target temperature of the thermostat
thermostat.target_fahrenheit
thermostat.target_celsius

# Get the minimum and maximum temperatures supported by the thermostat
thermostat.min_fahrenheit
thermostat.max_fahrenheit
thermostat.min_celsius
thermostat.max_celsius

# Get the current mode of the thermostat
thermostat.schedule_mode

# The possible schedule modes are one of the following 3 integers:
# 1. Run the schedule programmed into the thermostat
# 2. Temporarily hold a target temperature until the next scheduled event
# 3. Permanently hold a target temperature until the mode is manually changed

# Get other properties
thermostat.heating
thermostat.online
thermostat.serial_number

# Set a new temperature and permanently hold
# Note: Any pre-programmed thermostat schedules will be ignored until you resume the schedule or
# change the mode.
thermostat.set_target_fahrenheit(72)

# If you prefer celsius...
thermostat.set_target_celsius(22)

# You can also do this via the convenience property setters
thermostat.target_fahrenheit = 72

# or with celsius
thermostat.target_celsius = 22

# To resume the schedule programmed into the thermostat
thermostat.resume_schedule()

# Which is effectively the same as explicitly changing the mode like so
thermostat.schedule_mode = 1

# To set a new target temperature with an explicit schedule mode
thermostat.set_target_fahrenheit(72, mode=2)

# If you prefer celsius, you can use that too
thermostat.set_target_celsius(22, mode=2)

# Set a target temperature until a specified datetime
# Note: A timezone aware datetime should be passed in, otherwise UTC will be assumed
from datetime import datetime, timedelta, timezone
hold_time = datetime.now() + timedelta(hours=4)
thermostat.set_target_fahrenheit(69, mode=2, hold_time=hold_time)