A Python Wrapper for the usbpt104 library from Pico

Class based interface to the Pico (Omega) PT-104 RTD DAQ Module

Dependencies

• libusbpt104 (see installation)

What is Working

• discover units connected via USB (Ethernet untested)
• Configure the Channels
• Reading of measured values

What is not Working/Missing

• Documentation
• Configure the ethernet interface
• Connection via ethernet
• usage on Windows

Installation

Linux installation: 1. Install libusb104 following https://www.picotech.com/downloads/linux

Ubuntu 18.04:

sudo bash -c 'echo "deb https://labs.picotech.com/debian/ picoscope main" >/etc/apt/sources.list.d/picoscope.list'
wget -O - https://labs.picotech.com/debian/dists/picoscope/Release.gpg.key | sudo apt-key add -
sudo apt-get update
sudo apt-get install libusbpt104

2. Install this package:

   sudo pip3 install https://github.com/trombastic/Pico_PT104/archive/master.zip
   

Usage

from PT104 import PT104, Channels, DataTypes, Wires
unit = PT104()
unit.connect('AY429/026')
unit.set_channel(Channels.CHANNEL_1, DataTypes.PT100, Wires.WIRES_4)
value = unit.get_value_channel_1
if value:
    print('CH1: %1.3f'%value)
unit.disconnect()

Contribute

• Issue Tracker: https://github.com/trombastic/Pico_PT104/issues
• Source Code: https://github.com/trombastic/Pico_PT104

License

The project is licensed under the _GNU General Public License v3 (GPLv3)_.