pyEXOS

Python library to manage Extreme Networks devices running EXOS

Requirements

Python

• netmiko >= 1.4.2

Extreme Networks

• EXOS version == 16.2

Install

Install via pip

pip install pyEXOS

Upgrade via pip

pip install --upgrade pyEXOS

Documentation

Connect to remote device

>>> from pyEXOS import EXOS
>>> device = EXOS(hostname='192.168.1.222', username='admin', password='admin', port=22, timeout=10)
>>> device.open()

Load and later discard config

>>> device.load_candidate_config(config='configure snmp sysName test-string')
>>> print device.candidate_config
>>> ['configure snmp sysName test-string']
>>> device.discard_config()
>>> print device.candidate_config
>>> None

Retreive running config from the device

>>> device.get_running_config()
>>> print device.running_config
>>> [u'...']

Load, diff merge, commit merge config and later roll back to previous state

>>> device.load_candidate_config(filename='config_merge.txt')
>>> diff = device.compare_merge_config()
>>> print diff
>>> --- running_config.conf
+++ candidate_config.conf
@@ -22,0 +23 @@
+configure snmp sysName test-merge-file
>>> device.commit_config()

Load, diff replace, commit replace config and later roll back to previous state

>>> device.load_candidate_config(filename='config_replace.txt')
>>> diff = device.compare_replace_config()
>>> print diff
...
>>> device.commit_replace_config()
>>> device.rollback()

Close the connection

>>> device.close()

Caveats

Care needs to be taken with the compare_replace_config method. Extreme devices natively don't offer a config replace operation. Based on the diff with the to-be-applied config, pyEXOS will generate a set of commands to remove already existing config lines one by one. To generate the commands needed for removal, it uses a list of known commands embedded in the module. If your config holds a command not known to the module, it will silently ignore the removal and the command will remain on the device after a replace. The neccesary line will have to be added to the _generate_commands function, to be able to remove this command during the replace operation.

License

Copyright 2017 LINX

Licensed under the Apache License, Version 2.0: http://www.apache.org/licenses/LICENSE-2.0