PyMadoka
This library has been written to control the thermostat Daikin BRC1H family without the need to use the mobile Madoka apps.
The code is based on the previous work by Benjamin Lafois (both reverse engineering and OpenHAB add-on).
What does it provide?
- A Python library that can be used to integrate it with home automation systems (HomeAssistant)
- CLI tool to control the device (pymadoka)
- CLI tool to bridge the device with MQTT (pymadoka-mqtt)
Installation
pip install pymadoka
Requirements
The library has been developed and tested on Linux Python 3.
Once the thermostat has been paired and connected to a client, it is not available during a devices scan. Therefore, the library usually enforces a "disconnect" of the current client so it can be listed and become available for connection. I have not been able to find the way to do it using the BLE library so it relays on bluetoothctl to do it.
However, this bluetoothctl dependency results in a lack of compatibility with other operating systems, so only Linux is supported at the moment. Nevertheless, the "force disconnect" might be only required on Linux and can be disabled when testing other operating systems.
No other client must be connected to the device (even using the same Bluetooth adapter).
This library has been designed to operate exclusively with the device and messages coming as a response of commands issued to the device from other clients may interfer with the behaviour.
Pairing the device
As previously noted, the device has to be paired in order to work and it requires code confirmation on the screen. The best way to achieve it is to follow this steps:
- Disconnect the BRC1H from any other device by accessing the setup menu and pressing the "forget bluetooth connection" button
- Execute
bluetoothctl -
agent offto disable default bluetooth agent -
agent KeyboardDisplayto enable bluetooth agent for pairing -
scan onand wait 5s. The device MAC should be listed scan off-
pair <MAC_ADDRESS>. You will be prompted to confirm the code. After typing yes, you will have to confirm on the BRC1H screen.
Command line usage
pymadoka
The package provides a stand-alone CLI tool (pymadoka) that can be used to control the device. It outputs all the results in a convenient JSON format and can be configured using the following switches:
$ pymadoka
Usage: pymadoka [OPTIONS] COMMAND [ARGS]...
Options:
-a, --address TEXT Bluetooth MAC address of the thermostat
[required]
-d, --adapter TEXT Name of the Bluetooth adapter to be used for
the connection [default: hci0]
--force-disconnect / --not-force-disconnect
Should disconnect the device to ensure it is
recognized (recommended) [default: True]
-t, --device-discovery-timeout INTEGER
Timeout for Bluetooth device scan in seconds
[default: 5]
-o, --log-output PATH Path to the log output file
--debug Enable debug logging
--verbose Enable versbose logging
--version Show the version and exit.
--help Show this message and exit.
Commands:
get-clean-filter-indicator
get-fan-speed
get-operation-mode
get-power-state
get-set-point
get-status
get-temperatures
set-fan-speed
set-operation-mode
set-set-point
Output example:
{"cooling_fan_speed": "HIGH", "heating_fan_speed": "LOW"}
pymadoka-mqtt
This tool is intended to be used as a daemon. It helps to integrate the library into home automation systems that support MQTT climate devices. It requires a configuration file to specify all the MQTT supported features:
mqtt:
host: "localhost"
port: 1883
username: "myuser"
password: "mypassword"
ssl: False
friendly_name: "MyMadoka" # This is only used to report to HomeAssistant
root_topic: "/my_root_topic" # Default root topic is /madoka
root_topic_only: False # If False, don't append the device name to the root_topic
# Optional. If this field exist, a discovery message will be sent to this topic after the device is connected for the first time.
# <device_topic> tag will be replaced with /root_topic/XX_XX_XX_XX_XX_XX (unless root_topic_only is set)
discovery_topic: "/homeassistant/climate/<device_topic>/config"
daemon:
update_interval: 15 # Query the device at this interval (seconds)This is an example of the data sent with each status message:
$ docker run -it -p 1883:1883 -p 9001:9001 eclipse-mosquitto
$ docker run -it -p 1883:1883 -p 9001:9001 eclipse-mosquitto
$ mosquitto_sub -t "#"
{"fan_speed": {"cooling_fan_speed": "LOW", "heating_fan_speed": "LOW"}, "operation_mode": {"operation_mode": "AUTO"}, "power_state": {"turn_on": false}, "set_point": {"cooling_set_point": 17, "heating_set_point": 17}, "temperatures": {"indoor": 20, "outdoor": null}, "clean_filter_indicator": {"clean_filter_indicator": false}}
Usage:
$ pymadoka-mqtt --help
Usage: pymadoka-mqtt [OPTIONS]
Options:
-a, --address TEXT Bluetooth MAC address of the thermostat
[required]
-c, --config PATH MQTT config file [required]
-d, --adapter TEXT Name of the Bluetooth adapter to be used for
the connection [default: hci0]
--force-disconnect / --not-force-disconnect
Should disconnect the device to ensure it is
recognized (recommended) [default: True]
-t, --device-discovery-timeout INTEGER
Timeout for Bluetooth device scan in seconds
[default: 5]
-o, --log-output PATH Path to the log output file
--debug Enable debug logging
--verbose Enable versbose logging
--version Show the version and exit.
--help Show this message and exit.
Library usage
The main class is Controller. The Controller contains features that are used to control different aspects of the device such as: set point, fan speed, operation mode and others.
Each feature has two methods (when available):
- Query: query the device for the information related to the feature
- Update: update the device with the new feature status
Check the examples folder for more details.
Supporting new features
This library has been implemented to cover the basics of the HVAC. The official Madoka app seems to offer different GUIs according to the features of the HVAC model being controlled and mine doesn't seem to be as complex as others are. However, in the case you are interested in supporting other features, you can contribute by reverse engineering the Bluetooth messages required to control those features.
There are several ways to do it but one of the easiest is to snoop on the Bluetooth interface and capture all the traffic:
- Android bluetooth debugging. By the end of the chapter, it explains how to enable Bluetooth Snoop logs
- iOS bluetooth debugging.
Also, it is important to check the btmon utility as it can help with the message debugging on Linux.
Search for sent/received messages
$ sudo btmon | grep -C 5 ACL
Troubleshooting
- My device is not listed when I scan for devices using
bluetoothctl
Check that the BR1CH is not connected to any other device. Go to BR1CH screen, tap on the menu and look for the Bluetooth settings. Tap on disconnect.
- My client keeps disconnecting some seconds after connecting
Check that your devices are correctly paired (bluetoothctl paired-devices). If your device is not listed and you are not able to pair after several tries, it may be due to a failure on DBUS-Bluez service. You can try to restart the service by issuing:
$ sudo systemctl restart dbus-org.bluez.service
- It takes several seconds to execute each command
The execution of a single command takes some time as it has to follow several steps before it can write the command:
- Disconnect
- Discover devices/list services
- Connect
- Issue command
- Wait for response
- Setting the device set-point does not respect cooling/heating paremeters
Apparently, some devices like mine don't support separate set-point values and only the last set-point value sent in a command is used. Therefore, if you use the CLI or the library, be aware that the thermostat may set both set-points to the heating set-point. I have tested this behaviour by removing the heating set-point in the command implementation and it works like a charm. However, if I send both cooling followed by heating values, only heating set-point is used.
TODO
- Implement a BLE emulator or a Frida script to activate the app features not shown for the device
