ltest

A Unit, Integration, and System Tests Framework for LFE

Introduction
Dependencies
EUnit Compatibility
Features
Using ltest
Dogfood
License

Introduction ↟

The macros in this library are, in large part, inspired by Clojure's excellent unit test framework. In addition to provding such a testing DSL for LFE, this library also includes a visually pleasing test running with coloured output and obvious errors/test failures. It also provides the ability to skip tests.

Dependencies ↟

Version 0.11.0 is the first version to support and work with LFE 2.0.

As of version 0.7.0, this project assumes that you have rebar3 installed somwhere in your $PATH. It no longer uses the old version of rebar. If you do not wish to use rebar3, you may use the most recent rebar2-compatible release of ltest: 0.6.3.

EUnit Compatibility ↟

The tests created with ltest are compatible with EUnit and can be run from either Erlang or LFE, using the standard EUnit listener or the ltest listener (test runner).

Features ↟

(deftest ...) for standard unit tests
(deftestgen ...) for writing tests with generators, including the standard EUnit test fixtures (see naming caveat below)
(deftestskip ...) for skipping unit tests; note that for a test to show up as skipped in the test runner, it has to be exported in the module
(list ...)-wrapped tests (of arbitrary depth) for use as test sets
(tuple ...)-wrapped tests for naming/describing tests (first element of tuple)
(behaviour ltest-unit) - annotating a test module to be run as a unit test
(behaviour ltest-integration) - annotating a test module to be run as an integration test
(behaviour ltest-system) - annotating a test module to be run as a system test
A custom test runner that over-rides EUnit behaviour and aesthetics

Using `ltest` ↟

Adding ltest to Your Project ↟

In order to use ltest in your project, all you need to do is add a rebar dep. Generally, you only need ltest when running tests, so it's best to add it as a dependency in the test profile. You'll also need to tell EUnit where to take your tests from (eunit_compile_otps). In your rebar.config:

{profiles, [
  {test, [
    {deps, [
      {ltest, "0.13.7"}
    ]}
    {src_dirs, ["src", "test"]}
  ]}
]}.

Once you write some tests (see below for how to do that), you can then do this:

$ rebar3 as test lfe ltest

Structuring Your Tests ↟

ltest doesn not support putting your unit tests directly in your modules. If you do this, things may break or not work properly, even though Erlang's EUnit does support it.

Instead, you should create a top-level directory in your project called test. In test, create a test cases module for every module your project has, e.g., test/myproj-base-tests.lfe and test/myproj-util-tests.lfe. Obviously, if it makes sense to break things up in a more fine-grained manner, feel free to do so :-)

Furthermore, ltest supports separating unit, integration, and system tests. This is done using custom OTP behaviours. For each test cases module you have created in ./test, be sure to set the behaviour in the (defmodule ...) form. For instance:

  (defmodule my-unit-tests
    (behaviour ltest-unit)
    (export ...))

And two more as well:

  (defmodule my-integration-tests
    (behaviour ltest-integration)
    (export ...))

  (defmodule my-system-tests
    (behaviour ltest-system)
    (export ...))

For a working example of such a structure, see the layout of the ltest project itself: it uses just such a setup.

To read more about the distinction between unit, integration, and system tests, check out the Wikipedia article on testing.

Naming Rules ↟

Keep in mind that your tests will be compiled to .beam and then run with Erlang's eunit module. As such, your tests need to following the same conventions that eunit establishes:

Test module filenames should end in -tests, e.g., some-module-tests.lfe.
Test module and filename need to be the same, minus the extension. For example, test/unit-my-module-tests.lfe needs to be declared as (defmodule unit-my-module-tests ...) in the test case module.
If you chose not to use the deftest macro to build each unit test function, you will need to name your unit test functions with _test appended to them. For example, (defun unit-my-function-negagive-check_test () ...). We recommend, however, that you use deftest instead, and obviate the need for _test () boilerplate.

Creating Unit Tests ↟

ltest is entirely macro-based. ltest uses LFE to parse the Erlang macros in the eunit header file. It also provides its own header file which defines macros whose main purpose is to wrap the eunit macros in a more Lispy form.

ltest also provides a syntactic sugar macro for defining tests: deftest. Instead of writing something like this for your unit tests:

    (defun unit-my-function-test ()
      ...)

You can use deftest to write this:

    (deftest unit-my-function
      ...)

Note that the -test is no longer needed, nor is the empty argument list.

If you would like to use EUnit's fixtures feature, you must use another macro:

    (deftestgen unit-my-function
      ...)

See the unit tests in the test directory for example usage.

If you would like tests to be skipped, you can use this macro:

    (deftestskip unit-my-function
      ...)

This will simply make the test invisible to EUnit. EUnit doesn't actually track user-skipped tests; it only tracks tests that are skipped do to issues as perceived by EUnit.

However, ltest's test runner does track skipped tests and will report these in its output.

Here is a more complete example:

    (defmodule unit-mymodule-tests
      (behaviour ltest-unit)
      (export all))

    (include-lib "ltest/include/ltest-macros.lfe")

    (deftest is
      (is 'true)
      (is (not 'false))
      (is (not (not 'true))))

    (deftest is-not
      (is-not `'false))

    (deftest is-equal
      (is-equal 2 (+ 1 1)))

ltest is working towards full test coverage; while not there yet, the unit tests for ltest itself provide the best examples of usage.

Running Your Tests ↟

The recommended way to run unit tests is to use the LFE plugin got rebar3. Running tests is now as easy as doing the following:

    $ rebar3 as test lfe ltest

That will run any unit tests you have defined. To run integration or system tests in your project:

    $ rebar3 as test lfe ltest -tintegration
    $ rebar3 as test lfe ltest -tsystem

To run all tests for your project:

    $ rebar3 as test lfe ltest -tall

The LFE Test Runner ↟

ltest now includes a test runner which overrides the EUnit handlers with its own. Here's what the output looks like with failing and skipped tests:

End:

And here's what passing tests looks like:

End:

The rest of the make targets still use lfetool, and will continue to do so, since lfetool will be updating to use ltest's new runner. If you'd like to track the progress on these, here are the related tickets:

Dogfood ↟

ltest writes its unit tests in ltest :-) You can run them from the project directory:

    $ make check-runner-ltest

Which will give you output similar to the following:

================================ ltest =================================

------------------------------ Unit Tests ------------------------------

module: ltest-basic-tests
  is ................................................................ [ok]
  are* .............................................................. [ok]
  is_with_one_phrase_deftest ........................................ [ok]
  is_with_two_phrase_deftest ........................................ [ok]
  is_with_many_phrase_deftest ....................................... [ok]
  is_fail ........................................................... [ok]
  is_not ............................................................ [ok]
  is_not_fail ....................................................... [ok]
  is_equal .......................................................... [ok]
  is_equal_fail ..................................................... [ok]
  is_not_equal ...................................................... [ok]
  is_not_equal_fail ................................................. [ok]
  is_exception ...................................................... [ok]
  is_exception_wrong_class .......................................... [ok]
  is_exception_wrong_term ........................................... [ok]
  is_exception_unexpected_success ................................... [ok]
  is_not_exception .................................................. [ok]
  is_not_exception_exit ............................................. [ok]
  is_not_exception_throw ............................................ [ok]
  is_error .......................................................... [ok]
  is_error_wrong_term ............................................... [ok]
  is_error_unexpected_success ....................................... [ok]
  is_throw .......................................................... [ok]
  is_throw_wrong_term ............................................... [ok]
  is_throw_unexpected_success ....................................... [ok]
  is_exit ........................................................... [ok]
  is_exit_wrong_term ................................................ [ok]
  is_exit_unexpected_success ........................................ [ok]
  is_match .......................................................... [ok]
  is_match_fail ..................................................... [ok]
  time: 94ms

module: ltest-cancelled-tests
  setup_test_case ................................................... [ok]
  Another unused test ............................................... [ok]
  time: 17ms

module: ltest-fixture-tests
  setup_test_case ................................................... [ok]
  setup_test_case ................................................... [ok]
  Named setup test .................................................. [ok]
  setup_test_case ................................................... [ok]
  setup_test_case ................................................... [ok]
  Named setup test .................................................. [ok]
  setup_test_case ................................................... [ok]
  setup_test_case ................................................... [ok]
  Named setup test .................................................. [ok]
  foreach_test_case ................................................. [ok]
  foreach_test_case ................................................. [ok]
  setup_test_case ................................................... [ok]
  setup_test_case ................................................... [ok]
  Named setup test .................................................. [ok]
  foreach_test_case ................................................. [ok]
  foreach_test_case ................................................. [ok]
  time: 49ms

module: ltest-fixturecase-tests
  setup_tc_test_case ................................................ [ok]
  setup_tc_test_case ................................................ [ok]
  Named test in setup-tc ............................................ [ok]
  setup_tc_test_case ................................................ [ok]
  setup_tc_test_case ................................................ [ok]
  Named test in setup-tc ............................................ [ok]
  setup_tc_test_case ................................................ [ok]
  setup_tc_test_case ................................................ [ok]
  Named test in setup-tc ............................................ [ok]
  foreach_tc_test_case .............................................. [ok]
  foreach_tc_test_case .............................................. [ok]
  Named foreach-tc test ............................................. [ok]
  setup_tc_test_case ................................................ [ok]
  setup_tc_test_case ................................................ [ok]
  Named test in setup-tc ............................................ [ok]
  foreach_tc_test_case .............................................. [ok]
  foreach_tc_test_case .............................................. [ok]
  Named foreach-tc test ............................................. [ok]
  time: 56ms

module: ltest-generated-tests
  is* ............................................................... [ok]
  is_not*_in_list ................................................... [ok]
  many_generators_in_list ........................................... [ok]
  many_generators_in_list ........................................... [ok]
  many_generators_in_list ........................................... [ok]
  nested_test_set ................................................... [ok]
  nested_test_set ................................................... [ok]
  nested_test_set ................................................... [ok]
  nested_test_set ................................................... [ok]
  nested_test_set ................................................... [ok]
  nested_test_set ................................................... [ok]
  time: 34ms

module: ltest-named-tests
  named_is .......................................................... [ok]
  named_is_not_fail ................................................. [ok]
  named_testset_with_one ............................................ [ok]
  named_testset_with_two ............................................ [ok]
  named_testset_with_three .......................................... [ok]
  named_testset_nested .............................................. [ok]
  named_testset_deeply_nested ....................................... [ok]
  time: 22ms

module: ltest-skipped-tests
  bogus_test_will_be_skipped ...................................... [skip]
  time: 1ms

module: ltest-testset-tests
  testset_with_one .................................................. [ok]
  testset_with_two .................................................. [ok]
  testset_with_three ................................................ [ok]
  testset_nested .................................................... [ok]
  testset_deeply_nested ............................................. [ok]
  time: 16ms

summary:
  Tests: 90  Passed: 89  Skipped: 1  Failed: 0 Erred: 0
  Total time: 289ms


----------------------------- System Tests -----------------------------

There were no system tests found.


-------------------------- Integration Tests ---------------------------

There were no integration tests found.


========================================================================

License ↟

BSD 3-Clause License

Copyright © 2013-2021, Duncan McGreggor <oubiwann@gmail.com>

Copyright © 2014, Døkkarr Hirðisson <dokkarr@lfe.io>,
                  Joshua Schairbaum <joshua.schairbaum@gmail.com>

Copyright © 2016, Eric Bailey <eric@ericb.me>, 
                  jsc <jonas.skovsgaard.christensen@gmail.com>

ltest
Release 0.13.2

Release 0.13.2

0.13.9

0.13.8

0.13.7

0.13.6

0.13.5

0.13.4

0.13.3

0.13.2

0.13.1

0.13.0

Documentation

ltest

Contents

Introduction ↟

Dependencies ↟

EUnit Compatibility ↟

Features ↟

Using `ltest` ↟

Adding ltest to Your Project ↟

Structuring Your Tests ↟

Naming Rules ↟

Creating Unit Tests ↟

Running Your Tests ↟

The LFE Test Runner ↟

Dogfood ↟

License ↟

Stats

Development practices

Releases

Maintainers

Contributors

ltest Release 0.13.2

Release 0.13.2 Toggle Dropdown 0.13.9 0.13.8 0.13.7 0.13.6 0.13.5 0.13.4 0.13.3 0.13.2 0.13.1 0.13.0

Documentation

ltest

Contents

Introduction ↟

Dependencies ↟

EUnit Compatibility ↟

Features ↟

Using ltest ↟

Adding ltest to Your Project ↟

Structuring Your Tests ↟

Naming Rules ↟

Creating Unit Tests ↟

Running Your Tests ↟

The LFE Test Runner ↟

Dogfood ↟

License ↟

Stats

Development practices

Releases

Maintainers

Contributors

ltest
Release 0.13.2

Release 0.13.2

0.13.9

0.13.8

0.13.7

0.13.6

0.13.5

0.13.4

0.13.3

0.13.2

0.13.1

0.13.0

Using `ltest` ↟