pyW215 is a python3 library for interfacing with the d-link W215 Smart Plug.

The library is largely inspired by the javascript implementation by @bikerp dsp-w215-hnap.

Install using the PyPI index

pip install pyW215

#!python3
from pyW215.pyW215 import SmartPlug, ON, OFF

sp = SmartPlug('192.168.1.110', '******')
# Where ****** is the "code pin" printed on the setup card

# Get values if available otherwise return N/A
print(sp.current_consumption)
print(sp.temperature)
print(sp.total_consumption)

# Turn switch on and off
sp.state = ON
sp.state = OFF

Note: You need to know the IP and password of your device. The password is written on the side.

I personally no longer use my W215 but contributions are always welcome. If you do submit a PR please ping @LinuxChristian. If I don't respond within a few days just ping me again.

• v2.02
• v2.03
• v2.22

Note: If you experience problems with the switch upgrade to the latest supported firmware through the D-Link app. If the problem persists feel free to open an issue about the problem.

• v1.24 and v1.25 (State changing and current consumption working, but no support for reading temperature)
• D-Link W110 smart switch D-Link W110 smart switch (only state viewing and changing is supported)

If you have it working on other firmware or hardware versions please let me know.

Checkout this library, https://github.com/jonassjoh/dspW245

DSP-W218 uses a completly different protocol compare to earlier versions. There is no roadmap to add support for W218 but PR's are always welcome.