This library is intended for reading Huawei Sun2000 inverter metrics from registers via Modbus TCP. Access to the Modbus interface is established by connecting to the device's internal Wifi access point. For information about how to connect to this internal AP consult the official documentation of the device.

• Python >= 3.10

sun2000_modbus provides easy and comfortable access to your inverter's Modbus TCP interface. The following example gives a short introduction about how to read a register:

from sun2000_modbus import inverter
from sun2000_modbus import registers

inverter = inverter.Sun2000(host='192.168.8.1')
inverter.connect()
if inverter.isConnected():
    input_power = inverter.read_formatted(registers.InverterEquipmentRegister.InputPower)
    print(input_power)

The above code snippet prints out the current input power value, e.g. 8.342 kW.

During instantiation of a Sun2000 object the following parameters are accepted:

Several methods are provided to return the read register values in different formats:

Looking at the above example the different methods would return the following values for the input power metric:

Furthermore, a method read_range exists accepting the address of the register to start reading and either a quantity of registers or the address of the last register to be read. The result is returned as byte-string for further processing.

The following registers are provided by the Sun2000's Modbus interface and can be read accordingly. Documentation can be found here.