Telemetrix-Nano-2040-WiFi

Telemetrix-Nano-2040-WiFi is a member of the Telemetrix family and is a Python client specifically tailored to remotely control and monitor an Arduino Nano RP2040 Connect using Python scripts running on your PC.

When paired with the Telemetrix4Connect2040 custom Arduino server sketch, control and monitoring of the Arduino Nano RP2040 Connect is accomplished using a Wi-Fi link between the PC and the Arduino.

This library supports the following features:

• Analog and Digital Input
• Digital Outputs including PWM
• Onboard devices:
  • IMU
  • Microphone
  • RGB LED
• I2C device communications.
• SPI device communications.
• HC-SR04 Type distance sensors.
• DHT Type humidity/temperature sensors.
• Servo motors.
• NeoPixel strips.

A User's Guide explaining installation and use is available online.

The Python API for may be found here.

Here is a sample project that blinks the Arduino Board LED:

import sys
import time

from tmx_nano2040_wifi import tmx_nano2040_wifi

"""
Blink the board LED.
"""

# some globals
DIGITAL_PIN = 13  # the board LED

# Create a Telemetrix instance.
board = tmx_nano2040_wifi.TmxNano2040Wifi(ip_address='192.168.2.246')

# Set the DIGITAL_PIN as an output pin
board.set_pin_mode_digital_output(DIGITAL_PIN)

# Blink the Board LED
for blink in range(3):
    # When hitting control-c to end the program
    # in this loop, we are likely to get a KeyboardInterrupt
    # exception. Catch the exception and exit gracefully.
    try:
        print('1')
        board.digital_write(DIGITAL_PIN, 1)
        time.sleep(1)
        print('0')
        board.digital_write(DIGITAL_PIN, 0)
        time.sleep(1)
    except KeyboardInterrupt:
        board.shutdown()
        sys.exit(0)
board.shutdown()
sys.exit(0)